Steel Jupiter – Black Line (ATEX/ESD)
Product description
Steel Jupiter – Black Line is a brush nozzle for industrial vacuum cleaning systems, manufactured in oil-resistant NBR rubber and steel. The product is intended for applications where mechanical durability and controlled dissipation of electrostatic charges are required during vacuum cleaning and scrubbing.
What can the product be used for
- Vacuum cleaning with mechanical scrubbing of flat surfaces
- Removal of metal shavings, splinters, mineral dust and process residues
- Cleaning workbenches, machine surfaces and laboratory benches
- Use in industrial environments where control of electrostatic charging is required
Industries using the product
- General industry
- Process industry
- ATEX-related production environments
Technical note
The Black Line variant is manufactured using NBR rubber compound MM019NN. The electrical properties of the compound are documented through volume resistivity measurements performed by an accredited laboratory (CERISIE) in accordance with ISO 1853:2011.
The measured volume resistivity of the raw material is approximately 1.1 Ω·m, and the electrical resistance is stated within the range of 5–50 kΩ. The reported measurement results refer exclusively to the tested sample.
The manufacturer’s documentation states that identical values cannot necessarily be reproduced under different test conditions, in other laboratories or on finished products.
Progetto Gomma S.r.l. does not issue declarations of conformity with the ATEX Directive (94/9/EC / 2014/34/EU) for accessories for industrial vacuum cleaning systems. Accessories are not ATEX-certified as standalone components.
It is the responsibility of the equipment manufacturer to assess suitability, ensure correct equipotential bonding and perform the overall ATEX assessment of the finished equipment in which this product is installed.
Related technical knowledge on ATEX and electrostatic risk
- https://particulair.eu/en/the-invisible-weakest-link/
- https://particulair.eu/en/know-you-ohm-know-you-risk/
FAQ
What does it mean that Steel Jupiter – Black Line is antistatic?
Being antistatic means that the NBR rubber compound MM019NN used in the product has documented electrical properties that allow controlled dissipation of electrostatic charges, documented in accordance with ISO 1853:2011.
Is Steel Jupiter – Black Line ATEX certified?
No. Accessories such as brush nozzles are not ATEX-certified as standalone products. Compliance with the ATEX Directive must be assessed as part of the complete equipment.
Which materials are used in the product?
The product is manufactured using NBR rubber compound MM019NN and steel. The manufacturer’s documentation does not specify further alloy details for the steel components.
Can the product be used in ATEX zones?
The product may be used as a component in equipment intended for ATEX-classified zones, but only as part of an overall assessment of the finished system.
Technical specifications
Variant: PXBR
| Variant reference | Product code | Bristle type | Ø mm | Material | Operating temperature | Antistatic | FDA | Colour |
|---|---|---|---|---|---|---|---|---|
| PRA1638A-PXBR | PRA1638A | PXBR | 38 | NBR rubber (MM019NN) and steel | -20 °C to +100 °C | Yes | No | Black |
| PRA1640A-PXBR | PRA1640A | PXBR | 40 | NBR rubber (MM019NN) and steel | -20 °C to +100 °C | Yes | No | Black |
| PRA1650A-PXBR | PRA1650A | PXBR | 50 | NBR rubber (MM019NN) and steel | -20 °C to +100 °C | Yes | No | Black |
Variant: NATBR
| Variant reference | Product code | Bristle type | Ø mm | Material | Operating temperature | Antistatic | FDA | Colour |
|---|---|---|---|---|---|---|---|---|
| PRA1638A-NATBR | PRA1638A | NATBR | 38 | NBR rubber (MM019NN) and steel | -20 °C to +100 °C | Yes | No | Black |
| PRA1640A-NATBR | PRA1640A | NATBR | 40 | NBR rubber (MM019NN) and steel | -20 °C to +100 °C | Yes | No | Black |
| PRA1650A-NATBR | PRA1650A | NATBR | 50 | NBR rubber (MM019NN) and steel | -20 °C to +100 °C | Yes | No | Black |
Physical dimensions
Brushes: dimensions 160 × 90 mm.
Ordering information
This product is supplied as standard in batches of 20 pcs., providing the most advantageous pricing.
Orders of 10–19 pcs. are possible subject to a small surcharge.
For quantities of less than 10 pcs., please contact us to find the best solution.
