High-reach cleaning · ATEX · Up to 12 m
CLEANUP
No lift.
No compromise.
Carbon fibre telescopic system for dust removal from pipes, air ducts, beams and hard-to-reach surfaces up to 12 metres high — from floor level, without a lift, in demanding industrial environments.
Professional high-reach cleaning system from New Ermes Europe — distributed in Denmark by Particulair. Cleaning the unreachable, made straightforward.
Contact us
The challenge
Dust accumulates exactly
where you cannot reach.
Beams, air ducts, pipe installations and high-bay racking are difficult to clean without expensive lifts or scaffolding. In explosion-sensitive environments, dust accumulation is not just a maintenance issue — it is a safety risk. CleanUp gives you reach and control, safely from floor level.
- Cleaning up to 12 metres from floor level
- No lift, no scaffolding, no extra personnel
- Designed for demanding industrial environments
- Carbon fibre: exceptionally light and stiff even at full extension
- Four specialist nozzles cover every surface type
- Complete kit with carry bag — ready to use on-site
The system
Everything in one kit — ready to use
The CleanUp Kit contains everything you need for professional high-reach cleaning. Four carbon fibre tubes connect to deliver reach that normally demands a lift.
Included in kit
Storage bag
Robust nylon carry bag for storing and transporting the complete system. Keeps tubes and accessories organised and ready for use.
M045031000010
4 pcs included
Carbon fibre tubes × 1.5 m
4 carbon fibre tubes with glossy twill weave, Ø38 mm. Joined with button lock. The first tube features a soft grip handle for comfortable operation. MAX 12 m assembled.
F025272601110
Included in kit
135° carbon fibre bend
Fitted at the top of the telescopic pole, providing the optimal angle for nozzle attachment. Glossy twill carbon fibre, Ø38 mm, button lock.
F025272605010
System in action
Up to 12 metres of reach
Four 1.5 m tubes connect to reach warehouse ceilings, air ducts, installed pipework and structural beams that are otherwise inaccessible from floor level.
Accessories included in kit
Four nozzles — one system
Each nozzle is engineered for a specific cleaning task. Switch quickly with button lock — no tools required.
Pipe cleaning brush
Designed for dust removal from ducts and pipes from 50 mm up to over 800 mm in diameter. The brush head adapts to pipe diameter. Ø38 mm with button lock.
Crevice tool
For cleaning tight crevices, corners and hard-to-access gaps. Narrow geometry provides access where other nozzles cannot reach. Ø38 mm with button lock.
Round brush
For cleaning structural members, columns, water pipes and cylindrical surfaces. The brush ring provides consistent contact on perpendicular approach. Ø38 mm with button lock.
Flat surface nozzle
For cleaning flat surfaces, walls and ceilings. Wide contact area with bristles ensures effective dust pickup across large areas in a single pass. Ø38 mm with button lock.
Pipe brush in action
The brush head conforms to the surface, ensuring effective contact even on irregular pipe installations and hard-to-reach metal surfaces at height.
Flat nozzle in action
Walls, ceilings and corners reached precisely from floor level. The system eliminates the need for a lift when cleaning wall-ceiling junctions.
Optional extras
Additional bends and tubes
Extend the system with additional bends and tubes for specific installations. Ordered as a supplement to the base kit (F025200000010).
45° bend
Carbon fibre with glossy twill. Ø38 mm, button lock. For installations requiring a shallow angle of approach.
F025272606010
90° bend
Carbon fibre with glossy twill. Ø38 mm, button lock. For cleaning around corners where the system must change direction.
F025272607010
Extra tube 0.8 m
Single carbon fibre tube, 0.8 m, Ø38 mm, button lock. For fine-tuning reach when 1.5 m increments are too large.
F025272602210
Extra tube 1.5 m
Single carbon fibre tube, 1.5 m, Ø38 mm, button lock. Extend reach beyond the base kit configuration.
F025272601110Why CleanUp?
Engineered for industry. Built to last. Ready for where no one else can reach.
12 metres of reach
Four 1.5 m tubes connect into a rigid telescopic pole, reaching up to 12 m from floor level — without a lift or scaffolding.
Exceptionally light carbon fibre
Glossy twill carbon fibre is both stiffer and lighter than aluminium — manageable even at full extension.
Fast changeover
The button-lock system allows rapid nozzle changes and tube additions without any tools.
Four nozzles
Pipe brush, crevice tool, round brush and flat surface nozzle cover all typical high-level cleaning scenarios.
Complete and ready to go
Everything supplied in a single carry bag. No accessories need to be ordered separately to get started.
Industry-approved design
Produced by New Ermes Europe since 2026. Designed specifically for industrial environments requiring high cleaning effectiveness and robust equipment.
In action
CleanUp in industry
The system in real industrial environments — warehouses, production facilities and high-bay storage.
Documentation
Technical documentation
Data sheets, specifications and product documentation for the CleanUp system.
Documentation will be added here
Technical documentation, data sheets and product specifications for the CleanUp system will be inserted here when available.
Questions & answers
Frequently asked questions
What is the maximum reach with the CleanUp kit?
The included kit contains four 1.5 m carbon fibre tubes, providing a combined reach of up to 6 m with the base kit. With the addition of extra tubes, the system reaches up to 12 metres — a height that normally requires a lift or scaffolding.
Can CleanUp be used in ATEX-classified areas?
CleanUp is designed for use in demanding industrial environments, including areas at heights that normally require a lift. Carbon fibre is electrically conductive, and the WARNING label on the tubes specifically warns against use near live electrical conductors. It is the user's responsibility to verify suitability for specific ATEX-classified areas and to ensure correct equipotential bonding. Contact us for guidance.
What surfaces and installations is CleanUp suited for?
The system is well suited for dust removal from air ducts and ventilation pipes (pipe brush), structural beams and construction profiles (round brush), walls and ceilings (flat surface nozzle) and hard-to-reach crevices and corners (crevice tool). The system is particularly valuable in high-bay warehouses, production halls and industrial buildings with installations above 3 metres.
Are the tubes rigid enough when connected at full length?
Carbon fibre has a far higher stiffness-to-weight ratio than aluminium or steel. This makes it possible to work with the pole at full extension without it bending uncontrollably. The stiffness is especially critical for maintaining control and cleaning effectiveness near ceilings and beams.
What is the difference between the four included nozzles?
The pipe brush (F021422600010) is specifically designed for ducts from 50 mm up to over 800 mm in diameter. The crevice tool (F022402610010) accesses narrow gaps and tight spaces. The round brush (F021102610010) is ideal for round structures and pipe runs. The flat surface nozzle (F014772610010) is for broad, flat surfaces such as walls and ceilings. All attach with button lock on the 135° bend.
Can individual components be ordered separately?
Yes. Bends (45°, 90°, 135°) and individual tubes (0.8 m and 1.5 m) can all be ordered separately as supplements to the base kit. Contact Particulair for a configuration tailored to your specific installation requirements.
Should CleanUp solve your high-reach cleaning?
Particulair helps you find the right configuration for your specific installations and heights. We advise on equipment, button-lock compatibility and the correct nozzles for the task.
Read more about CleanUp and other solutions for hard-to-reach areas on the ATEX overview.