Accessories · Accessory

CONNECT 241 AS

CONNECT 241 AS is a black spiral hose connector with thread that is screwed onto the hose. The manufacturer states that the wall is permanently antistatic with a resistance below 10⁹ Ω and describes it as highly abrasion-resistant and resistant to microbes and hydrolysis. It can be used from −40 to +90 °C, briefly up to +125 °C, and is available for hoses with inner Ø from 32 to 300 mm.

Download datasheet (PDF)

Antistatic < 10⁹ Ω Screw-on Ø 32 to 300 mm −40 to +90 °C
  • Antistatic
  • Abrasion-resistant
  • −40 to +90 °C

Technical specifications

The product's key specifications are briefly summarised below.

Type Spiral hose connector with thread, screw-on
Colour Black
Electrical resistance Antistatic, below 10⁹ Ω (volume and surface resistance approx. 10⁹ Ω)
Temperature −40 to +90 °C, briefly +125 °C
Hoses 350, 351, 355, 533, 341, 345
Manufacturer SKU 2418500

Dimensions and ordering

The table shows the standard sizes of the connector.

Dimensions and article numbers for CONNECT 241 AS
Inner Ø
[mm]		 Total length
[mm]		 Weight
[kg/pc.]		 Article no.
32850.0824100328500
751070.2324100758500
801120.2624100808500
1001220.4224101008500
1251370.6324101258500
1501550.9624101508500
2001801.624102008500
2501952.3524102508500
3002152.7924103008500

Inner Ø is the inner Ø of the hose; the diameter of the receiving nozzle is the same. Weight is per piece. Length of the receiving nozzle and screw-in depth of the hose: Ø 32: 44 and 40 mm. Ø 75: 60 and 47 mm. Ø 80: 60 and 52 mm. Ø 100: 65 and 57 mm. Ø 125: 75 and 62 mm. Ø 150: 85 and 70 mm. Ø 200: 100 and 80 mm. Ø 250: 105 and 90 mm. Ø 300: 115 and 100 mm.

Compatible with these hoses

This accessory is qualified by the manufacturer for the following hoses.

AIRDUC® PUR 350 AS (MD)
ATEX/ESD

AIRDUC® PUR 350 AS (MD)

Lightweight antistatic PUR hose for pneumatic transport in ATEX zones
AIRDUC® PUR 351 EC (MD)
ATEX/ESD

AIRDUC® PUR 351 EC (MD)

Electrically conductive polyurethane hose for ATEX zones
AIRDUC® PUR 355 AS (HD)
ATEX/ESD

AIRDUC® PUR 355 AS (HD)

Antistatic heavy-duty polyurethane hose for abrasive media in ATEX zones
TIMBERDUC PUR 533 AS
ATEX/ESD

TIMBERDUC PUR 533 AS

Highly abrasion-resistant suction and pressure hose with increased pressure and vacuum resistance
AIRDUC® PVC 341 (MD)
Abrasive

AIRDUC® PVC 341 (MD)

Flame-retardant PVC suction and pressure hose — MD construction for industrial extraction and powder pneumatics
AIRDUC PVC 345 (HD)
Abrasive

AIRDUC PVC 345 (HD)

Heavy-duty PVC suction and pressure hose for industrial dust and powder extraction

Related hoses

Hoses often considered alongside this one. Suggestions are based on the same category and similar properties.

CONNECT 241 AS Moulded
Accessories

CONNECT 241 AS Moulded

Antistatic moulded soft sleeve <10⁹ Ω - for industrial vacuum cleaners and municipal vehicles
CONNECT 240 EC
Accessories

CONNECT 240 EC

Electrically conductive soft sleeve for AIRDUC EC/AS series - chemical-, microbe-, hydrolysis-resistant

Frequently asked questions

Is the connector approved for ATEX?

The manufacturer states that the connector is antistatic with a resistance below 10⁹ Ω but does not state any ATEX use. Whether it can be used in a particular zone depends on the overall zone assessment of the installation.

Is it available for the 356 series?

Yes, CONNECT 241 AS for 356 is a separate version for hose 356.