Tiger-Vac • Clean Room • Dry recovery only

Tiger-Vac CR-1300D

High-performance cleanroom vacuum in electropolished AISI 316 stainless steel with dual ULPA U15 exhaust filtration. ISO Class 4 compatible. Autoclavable tank and wheels. ESD safe. 194 m³/h. 28 kg.

2 × ULPA U15 ISO Class 4 Bypass motor Autoclavable ESD safe GMP compatible AISI 316 Electropolished

Dual ULPA U15 filters (EN 1822) — one at working air exhaust, one at cooling air exhaust
ULPA filtration efficiency 99.999 % at 0.12 µm — tested to IEST-RP-CC001
Full AISI 316 construction with electropolished finish — filter housing and collection tank
Tank and white nylon wheels autoclavable up to 121 °C
Filter blockage indicator — LED alerts when collection bag is full
Every unit aerosol leak tested as a complete assembly before leaving the factory

Tiger-Vac CR-1300D cleanroom vacuum in electropolished AISI 316 stainless steel

2 × ULPA U15 — EN 1822 / IEST-RP-CC001

ISO Class 4 (ISO 14644-1)

Class M (IEC 60335-2-69)

CE — Machinery Directive 2006/42/EC

CE — Low Voltage Directive 2014/35/EU

EMC Directive 2014/30/EU

What is the Tiger-Vac CR-1300D?

The CR-1300D is a high-performance cleanroom vacuum designed specifically for the pharmaceutical, semiconductor, and microelectronics industries. It is built entirely from AISI 316 stainless steel with an electropolished finish that removes surface contamination and facilitates decontamination. The 38-litre recovery tank — including the white nylon wheels — is fully autoclavable up to 121 °C.

The filtration system uses a disposable collection bag and a polyester cloth filter as primary stages, followed by two downstream ULPA U15 filters (EN 1822) positioned at both the working air and cooling air exhausts — the approach required when a bypass motor is used in a cleanroom environment. In a bypass motor, cooling air travels a separate path that bypasses the main filtration system and exits the machine directly. If this exhaust path is unfiltered, it risks contaminating the cleanroom with the particles disturbed during vacuuming. Tiger-Vac addresses this with two separate ULPA filters, one for each airstream.

ULPA filtration efficiency reaches 99.999 % at 0.12 micron and 99.9995 % at 0.18 micron (MPPS), tested and documented in accordance with IEST-RP-CC001. The vacuum is compatible with ISO Class 4 cleanrooms as defined in ISO 14644-1 and supports compliance with GMP requirements. Every unit is aerosol leak tested before leaving the factory.

The filter blockage indicator alerts the operator when the collection bag is approaching capacity, allowing the bag to be changed before airflow is noticeably reduced. In high-frequency operating environments, this prevents unplanned interruptions and maintains consistent suction performance. The standard model ships with white autoclavable nylon wheels; static conductive grey wheels (not autoclavable) are available as an option.

Important limitation: The CR-1300D is intended for dry recovery only. It must not be used for liquids, slurry, or wet material, as the suction motor is not protected against moisture ingress.

Technical specifications

Parameter	Value
Exhaust filters	2 × ULPA U15 (EN 1822 / IEST-RP-CC001) — working air and cooling air
ULPA filtration efficiency	99.999 % at 0.12 µm • 99.9995 % at 0.18 µm (MPPS)
ULPA filter area	20,253 cm²
Primary filtration	Synthetic disposable filter bag (19 L, Class M) + polyester cloth filter (3,480 cm²)
Cleanroom compatibility	ISO Class 4 (ISO 14644-1 • FED STD 209E Class 10)
Filter indicator	LED indicator for full collection bag
Motor type	2-stage bypass
Power	1.2 kW / 1200 W
Voltage	240 V, 50 Hz, single phase
Current draw	5 A
Airflow	194 m³/h
Vacuum	2,504 mmH₂O
Sound level	65/75 dB(A)
Inlet diameter	38 mm
Tank (total)	38 L — stainless steel AISI 316
Bag capacity	19 L (synthetic, 8,217 cm²)
Wheel system	4-wheel dolly — autoclavable white nylon wheels (121 °C)
Static resistance	< 10 Ω (static dissipating)
Dimensions	H 80 × W 53 × D 61 cm
Weight (without accessories)	28 kg
Cable length	10.6 m
Recovery type	Dry only
Autoclavable	Tank + wheels up to 121 °C
Material — filter housing and tank	Stainless steel AISI 316, electropolished

CE marking based on: EN 60204-1:2018 • EN 60335-1:2012 (A11:2014, A13:2017, A15:2021) • EN 60335-2-2:2010 (A11:2012, A1:2013) • EN 61000-6-2:2005 • EN 61000-6-4:2007 (A1:2011)

Accessories and options

The CR-1300D ships with two ULPA U15 filters (included), polyester cloth filter and disposable collection bag as standard. Three accessories kits are available as options — choose the kit that matches your cleaning protocol and classification requirements.

Two ULPA U15 filters for Tiger-Vac CR-1300D — included

2 × ULPA U15 filter

Part no. 219372 • Included

Polyester cloth filter and cage for Tiger-Vac CR-1300D — included

Cloth filter + cage

Part no. 215393 • Included

Synthetic disposable filter bag for Tiger-Vac CR-1300D, part no. 218063-5

Disposable filter bag (5-pack)

Part no. 218063-5 • Included

Basic accessories kit for wet and dry recovery, 32 mm, Tiger-Vac CR-1300D

Basic accessories kit — wet/dry

Part no. 323306WD • 32 mm • Option

ESD-safe accessories kit #2, 32 mm, for Tiger-Vac CR-1300D

Kit #2 — ESD-safe accessories

Part no. 323602 • 32 mm • Option

Autoclavable accessories kit #3, 32 mm, for Tiger-Vac CR-1300D, part no. 323604

Kit #3 — Autoclavable accessories

Part no. 323604 • 32 mm • Option

Choosing the right accessories kit

The basic kit (323306WD) covers routine dry and wet cleaning with a clear urethane hose, stainless steel extension wands, and standard floor and crevice tools. Kit #2 (ESD-safe) is designed for environments with electrostatic requirements: conductive hose, conductive plastic tools, and conductive nylon brushes throughout. Kit #3 (autoclavable) is the right choice when accessories need to be sterilised alongside the tank — the hose is EPDM, the wands are stainless steel, and the nozzles are food-grade silicone.

Questions and answers

Why does the CR-1300D have two ULPA filters instead of one?

The CR-1300D uses a bypass motor. In a bypass motor, cooling air travels a separate internal path that bypasses the main filtration system, so it never passes through the primary ULPA filter. If this cooling air exhaust is unfiltered, it can release particles disturbed during vacuuming back into the cleanroom. Tiger-Vac solves this by fitting a ULPA U15 filter at both the working air exhaust and the cooling air exhaust — both airstreams leave the machine at cleanroom quality.

What does the factory aerosol test involve, and why does it matter?

Tiger-Vac performs an aerosol leak test on the fully assembled unit before it leaves the factory. The test verifies not just that the filters meet specification — it also confirms that gaskets, joints, and all components in the airpath are tight. A filter with perfect efficiency values is worthless if there is a bypass leak around the filter gasket. The test documentation can be requested and supports the validation process in GMP-regulated facilities.

What does electropolished AISI 316 mean in a pharmaceutical context?

AISI 316 is the most corrosion-resistant of the common stainless steel grades — its molybdenum content makes it resistant to chlorides and many chemicals used in pharmaceutical manufacturing. Electropolishing is an electrochemical process that removes the outermost microscopic layers of the metal, leaving a smooth, mirror-like surface free of micro-crevices. In a pharmaceutical context, there are no sites where particles or microorganisms can lodge, and the surface can be cleaned effectively with aggressive disinfectants. Electropolished AISI 316 is the standard requirement for GMP Grade A and B environments.

Can the tank be autoclaved without dismantling the entire unit?

Yes. The tank separates from the motor head without tools. The white nylon wheels are likewise autoclavable up to 121 °C. The motor head and filters must not be autoclaved — but they do not need to be, as they are on the clean side of the filtration path. Accessories such as hose and tools can be autoclaved separately using Kit #3 (autoclavable accessories, part no. 323604).

What is the difference between the CR-1300D and CR-1200D?

Both are built in electropolished AISI 316 and are compatible with ISO Class 4. The CR-1300D uses a bypass motor and achieves cleanroom compatibility through dual ULPA U15 filters (one at working air, one at cooling air). The CR-1200D uses a thru-flow motor with a single downstream ULPA U15 filter and an upstream HEPA H14 filter for motor protection. The CR-1300D is the larger model with a 38-litre tank (compared to approximately 10 litres in the CR-1200D) and weighs 28 kg against 16 kg. Choose the CR-1300D when higher recovery volume is decisive, or when your process calls for bypass motor technology.

What does the filter blockage indicator signal — and when should the bag be changed?

The filter blockage indicator activates when resistance from the collection bag causes airflow to drop noticeably — a sign the bag is approaching its 19 L capacity. In environments handling potent compounds (OEB 3), the collection bag should be handled with gloves and disposed of in accordance with the facility's contaminated waste procedure. The collection bag (part no. 218063-5, pack of 5) is synthetic.

Is the CR-1300D suitable for use in GMP-regulated facilities?

Yes. The CR-1300D is designed specifically for pharmaceutical manufacturing and is compatible with the requirements for cleaning equipment in classified areas under GMP. CE marking is based on Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU, and EMC Directive 2014/30/EU. The EU Declaration of Conformity (issued April 2024) and filter test report are available as validation documentation. The electropolished AISI 316 steel, autoclavable tank, and documented aerosol leak test all support a GMP validation package.

Is the Tiger-Vac CR-1300D the right model for your facility?

We help specify the right vacuum for your ISO class, OEB level, and cleaning protocol — and ensure accessories match your autoclave and ESD requirements. Advisory is free and non-binding.