White Line • Wall Mounted • Fixed Workstation • HEPA H14

Tiger-Vac T1-3L (WM) HEPA

The permanent HEPA H14 cleaning solution for workstations in pharma and life science. Mounts on the wall — always in place, always ready, no cords on the floor.

HEPA H14 — 99.995 % at 0.3 µm, aerosol leak tested before delivery
3-stage filtration: disposable bag + cloth filter + HEPA H14
Always at the workstation — no searching for a vacuum
60 dB(A) — quiet and well suited to daily use
Stainless steel wall brackets (2 pcs.) included — clean GMP installation
Thru-Flow motor — all exhaust air passes through HEPA before returning to the room
Hose + 3 specialist nozzles included — ready to mount and use

Tiger-Vac T1-3L (WM) HEPA wall-mounted vacuum with HEPA H14 filter for pharma and life science

HEPA H14 — EN 1822 / IEST-RP-CC001

Aerosol leak tested before delivery

CE — Machinery Directive 2006/42/EC

EN 60335-2-69 — Class H

GMP compatible

Stainless steel wall brackets included

What is the Tiger-Vac T1-3L (WM) HEPA?

The T1-3L (WM) HEPA is a wall-mounted vacuum from Tiger-Vac designed as a permanent cleaning station in pharmaceutical production, laboratories and other life science environments. WM stands for Wall Mounted. The unit attaches to the wall with two included stainless steel brackets and is always in place at its fixed position — no searching for a vacuum, no cords on the floor and no risk of the unit being in another department when it is needed.

The filtration system works in three stages: a 3 L disposable vacuum bag captures the coarser particles, a permanent cloth filter catches the intermediate fraction, and a HEPA H14 final filter removes 99.995 % of particles at 0.3 µm (MPPS). The HEPA filter is tested to IEST-RP-CC001 and rated H14 by the MPPS method in accordance with EN 1822. Each complete unit is aerosol leak tested at the factory before despatch, confirming that filter seals are intact and performance matches the specification.

The Thru-Flow motor ensures that all air — including the motor cooling air — passes through the HEPA filter before being returned to the room. There are no uncontrolled airstreams in the vacuum's design. At 60 dB(A), the T1-3L (WM) HEPA is remarkably quiet and well suited to daily use at a fixed workstation.

Important use restriction: The T1-3L (WM) HEPA is designed exclusively for dry recovery of dust and particles. It must not be used for liquids or wet material, as the motor is not protected against moisture. Please contact us if your facility requires combined wet and dry recovery.

Technical specifications

Parameter	Value
Filter class EU	Class H (EN 60335-2-69)
Filter class USA	HEPA H14 (EN 1822 / IEST-RP-CC001)
Filter efficiency	99.995 % at 0.3 µm (MPPS)
Filtration	3-stage: paper bag + cloth filter + HEPA H14
Motor type	Thru-Flow, heavy duty
Power	1.3 kW / 900 W
Supply	230 V, 50 Hz, single phase, 4 A
Air flow	166 m³/h
Vacuum pressure	2,464 mm H₂O
Sound level	60 dB(A)
Suction inlet	Ø38 mm
Bag capacity	3 L (vacuum bag)
Tank capacity	4 L
Cord length	10 m
Dimensions	H 51 × W 25 × D 25 cm
Weight (vacuum only)	5 kg
Recovery type	Dry only
Mounting	Wall mounted (WM) • Stainless steel brackets included

CE marking based on: EN 60335-2-69 • EN 1822 • IEST-RP-CC001 • Machinery Directive 2006/42/EC • Low Voltage Directive 2014/35/EU • EMC Directive 2014/30/EU

Included accessories

The T1-3L (WM) HEPA is supplied with a HEPA H14 filter, vacuum bags, cloth filter, suction hose, three specialist nozzles and two stainless steel wall brackets. No telescopic extension tubes are included — the vacuum is used directly from the wall with the hose and nozzles.

HEPA H14 filter

Part no. 212303 • Included

Disposable paper filter bags for Tiger-Vac T1-3L, pack of 5, part no. 212075

Vacuum bags (5 pcs.)

Part no. 212075 • Included

Tiger-Vac T1-3L (WM) HEPA mounted on wall with stainless steel brackets

Stainless steel wall brackets (2 pcs.)

Part no. 212087WB • Included

Suction hose

Part no. 323620 • 1.25″ × 5′ (1.5 m) • Included

Nozzle kit for Tiger-Vac T1-3L (WM): crevice, upholstery, dusting brush

Nozzle kit (3 pcs.)

Crevice • Upholstery • Dusting brush • Included

Wall brackets, cloth filter and vacuum bags

The cloth filter (part no. 217504) is a permanent fabric filter positioned between the disposable bag and the HEPA filter. It captures the mid-range particles that may pass through the bag, extending the service life of the HEPA filter. Vacuum bags (part no. 212075, pack of 5) seal when removed from the tank, preventing collected material from being dispersed when the bag is changed.

Questions and answers

What is the advantage of a wall-mounted vacuum over a mobile model?

A wall-mounted vacuum is always in position — the operator does not need to fetch it, wheel it over or locate a power outlet. In pharmaceutical production this reduces the risk of cleaning being skipped because it is inconvenient. There is also no vacuum rolling across the floor creating contamination transfer between zones, and the stainless steel bracket installation is clean and GMP-friendly.

Where is the T1-3L (WM) HEPA most useful?

The model is particularly suited as a permanent cleaning station at workbenches and laboratory surfaces, at isolators and laminar flow cabinets, at weighing stations for potent compounds, in gowning rooms for decontamination of personnel and clothing, and at material airlocks for cleaning packaging before it moves between zones. Anywhere a permanently available HEPA cleaning station replaces a travelling mobile vacuum.

What does aerosol leak tested before delivery mean?

Tiger-Vac performs an aerosol integrity test on each individual vacuum unit before it leaves the factory. The test checks not just the HEPA filter in isolation, but the entire airpath — including gaskets and all joints — for leakage. It provides documented assurance that the vacuum performs as stated on the data sheet, which contributes meaningfully to validation documentation in regulated pharma environments.

Can the T1-3L (WM) HEPA be used for equipment and clothing decontamination?

Yes. That is precisely what the vacuum is designed for. The three included nozzles — crevice tool, upholstery tool and dusting brush — are well suited for cleaning process equipment, instruments and packaging. The dusting brush is typically used for decontaminating personnel clothing and suits in gowning areas. The suction hose (1.5 m) reaches from the wall mounting to the work area — the distance from wall to workbench should be considered when planning the mounting height.

Is the T1-3L (WM) HEPA GMP compatible?

Yes. The T1-3L (WM) HEPA is CE marked under the Machinery Directive 2006/42/EC and complies with EN 60335-2-69 Class H — the standard for vacuum cleaners designed for hazardous dust types. The plastic body is easy to wipe down and disinfect, and HEPA H14 filtration meets GMP requirements for contamination control during routine cleaning operations. Validation documentation (EU Declaration of Conformity and filter test report) is available on request.

Is the Tiger-Vac T1-3L (WM) HEPA the right model for you?

We help you specify and position the right fixed cleaning station in your production area. Call or write — our advice is free and without obligation.