Chemical-resistant · Chemical-resistant

CP PTFE/HYP-INOX 472 EC

EC version of CP PTFE/HYP-INOX 472 — electrically conductive (PTFE film with carbon addition) and certified per ATEX 2014/34/EU + TRGS 727. Service from −40 °C to +170 °C. Designed for chemical industry and explosion hazard areas where moderate high temperature combines with ATEX requirements.

Download datasheet (PDF)

ATEX Zone 0·1·2·22 Up to +170 °C Conductive PTFE Anti-adhesive

ATEX Zone 0·1·2·22
Conductive <10⁶ Ω
Up to +170 °C
Anti-adhesive
INOX clamp profile
Cut to length

Why this hose?

CP PTFE/HYP-INOX 472 sits between the 471 range (PTFE/glass-INOX, +260 °C) and standard CP PVC in the temperature segment. It's a good middle position for chemical applications where the medium is aggressive but temperature is moderate — typically vapour return at operating temperatures.

The HYP outer layer provides better mechanical durability than glass fibre reinforcement during handling — particularly in installations where the hose is moved or adjusted regularly. The PTFE inner lining delivers the broad chemical resistance.

Where it is used

In chemical industry the hose typically sits on vapour return installations where process vapours are chemically aggressive but at operating temperature (below +170 °C). It covers a broad part of chemical industry applications without over-specifying on temperature.

In pharma it's used where anti-adhesion is important but ATEX isn't a requirement — e.g. specific process applications in enclosed environments.

In everyday talk we call it a "PTFE/HYP" — it sits in the middle segment for PTFE-based hoses.

Technical specifications

Technical specifications for CP PTFE/HYP-INOX 472.

Material	PTFE (conductive), HYP outer layer, INOX clamp
Temperature	−40 to +170 °C
Resistance	PTFE film <10⁶ Ω
ATEX	Zone 0·1·2 (gas) + Zone 22 (dust)
Conformity	ATEX 2014/34/EU, TRGS 727, REACH, RoHS
Cut to length	Yes
Manufacturer SKU group	4721003

Dimensions and ordering

Standard dimensions for CP PTFE/HYP-INOX 472.

Dimensions, pressure and vacuum data for CP PTFE/HYP-INOX 472 EC
Inner Ø [mm]	Outer Ø [mm]	Working pressure DIN 26057, 10 % elong. [bar]	Vacuum axially fixed [bar]	Bend radius [mm]	Max. length [m]	Weight [kg/m]	Roll [m]	Article no.
50.5	62.5	0.41	0.3	18	20	0.7	6	47200501003
60	72	0.37	0.25	20	20	0.82	6	47200601003
64.5	76.5	0.355	0.23	22	20	0.88	6	47200651003
70	82	0.34	0.21	22	20	0.95	6	47200701003
75.6	87.6	0.325	0.18	24	20	1.02	6	47200751003
80	92	0.315	0.16	24	20	1.07	6	47200801003
90	102	0.29	0.11	26	20	1.2	6	47200901003
101.5	113.5	0.195	0.1	28	20	1.04	6	47201001003
110	122	0.185	0.085	30	20	1.13	3, 6	47201101003
115	127	0.18	0.08	32	20	1.18	3, 6	47201151003
120	132	0.175	0.075	32	20	1.22	3, 6	47201201003
126.5	138.5	0.17	0.07	34	20	1.29	3, 6	47201251003
130	142	0.165	0.06	34	20	1.32	3, 6	47201301003
140	152	0.16	0.05	36	20	1.42	3, 6	47201401003
151.5	163.5	0.11	0.04	38	20	1.18	3, 6	47201501003
160	172	0.105	0.035	40	20	1.24	3, 6	47201601003
170	182	0.1	0.035	42	20	1.31	3, 6	47201701003
180	192	0.095	0.03	44	20	1.39	3, 6	47201801003
202.3	214.3	0.09	0.025	48	20	1.56	3, 6	47202001003
225	237	0.085	0.02	54	20	1.73	3, 6	47202251003
250	262	0.065	0.02	58	20	1.91	3, 6	47202501003
254	266	0.065	0.02	59	20	1.94	3, 6	47202541003
300	312	0.055	0.01	68	20	2.29	3, 6	47203001003
315	327	0.055	0.01	71	15	2.4	3, 6	47203151003
350	362	0.04	0.01	78	15	2.66	3, 6	47203501003
356	368	0.04	0.01	79	15	2.7	3, 6	47203561003
400	412	0.04	0.01	88	15	3.03	3, 6	47204001003
405	417	0.038	0.08	90	10	3.07	—	47204051003
450	462	0.035	0.005	98	10	3.41	3, 6	47204501003
500	512	0.03	0.005	108	10	3.78	3, 6	47205001003
550	562	0.025	0.005	118	10	4.15	—	47205501003
600	612	0.02	0.005	128	6	4.53	3	47206001003

Fields without a value (—) are not specified in the manufacturer's factsheet. Overpressure and underpressure values are recommended operating limits; the product can be subjected to higher loads on request. Bend radius is measured along the inside of the hose bend.

Standards and compliance

CP PTFE/HYP-INOX 472 conforms to:

ATEX 2014/34/EU (1999/92/EC). Directive for equipment in explosive atmospheres. Covers Zone 0, 1, 2 (gas) and Zone 22 (dust).
TRGS 727. German technical rule for handling of hazardous substances.
REACH and RoHS. EU directives for chemicals.

Documentation and downloads

Additional documents about this hose, its compliance and installation. Click to download as PDF in a new tab.

Datasheet (Particulair) Our 4-page datasheet with specifications, dimension table, applications and contact info. PDF REACH declaration Manufacturer declaration of REACH compliance (EC 1907/2006). PDF · 2026 RoHS declaration Manufacturer declaration of RoHS directive compliance. PDF · 2025 ISO 9001 certificate Quality management certificate for the production. PDF Installation guidelines General installation guidelines. PDF · 2025 ATEX and TRGS test report Test report for ATEX 2014/34/EU and TRGS 727 for conductive and antistatic hoses. PDF Chemical resistance table Manufacturer's overview of chemical resistance for materials, organised by medium. PDF · 2025 CP-series ingress protection Description of the clamp profile's ingress protection against moisture and particles. PDF · 2025

Help with material selection

If you're choosing a hose and are unsure about the right resistance level or zone classification, these two articles are a good place to start:

ESD

The invisible weakest link

Why a conductive or antistatic hose isn't sufficient on its own — and what grounding means for the complete system.

Read the article

ESD

Know your ohm

The difference between antistatic and conductive, which resistance limits apply where, and how to measure them correctly.

Read the article

Industries that use it

CP PTFE/HYP-INOX 472 is broadly applicable in chemical industry:

In chemical industry it covers vapour return and vapour extraction at moderate temperatures. PTFE's broad resistance makes it compatible with almost all media.

In pharma it's used where anti-adhesion is important — e.g. transporting powders that would otherwise form deposits.

Custom lengths and assemblies

The hose is delivered on 3 m, 6 m and 10 m rolls. We cut to length and fit INOX or PTFE-lined couplings.

For chemical facilities we advise on coupling materials matching your specific medium.

See our custom hose assemblies

Related hoses

Hoses often considered alongside this one. Suggestions are based on the same category and similar properties.

Frequently asked questions

What's the difference between 472 and 472 EC?

472 is insulating standard version. 472 EC has conductive PTFE film and is ATEX-approved for Zone 0, 1, 2 (gas) and Zone 22 (dust). Choose 472 EC for ATEX zones.

What's the difference between 472 EC and 471 EC?

472 EC covers up to +170 °C; 471 EC covers up to +250 °C. Both have conductive PTFE and same ATEX marking. Choose 472 EC at moderate temperatures (cost + better mechanical handling); choose 471 EC at higher temperatures.

Does the hose need to be grounded?

Yes, ALWAYS. The ATEX approval requires correct grounding at both ends.

What is Zone 22?

Zone 22 is the lowest classification for explosive dust environments — occasional dust (e.g. in mill rooms or packaging machines). The hose covers this internally.

Does it tolerate +170 °C continuously?

Yes, +170 °C is specified as continuous service limit. Short-term peak up to the same level (170 °C is the hard limit for the HYP outer layer).

Can I get it with ATEX-approved couplings?

Yes. We fit INOX flanges with correct grounding — important for ATEX compliance to be maintained in the entire installation.