Depureco MINIBULL ACD
- 3D-printing laboratories with metal powder from SLM and DMLS processes
- Dental technicians and jewellery workshops collecting precious-metal dust
- Field service tasks at customer sites with combustible process dust
- Temporary installations where permanent ATEX fit-out is impractical
- Pharmaceutical workshops with carcinogenic powders
- IEC 60335-2-69 Annex AA (ACD)
- Low Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU
Depureco MINIBULL ACD
The Depureco MINIBULL ACD is designed for field service engineers and site work: a 45-litre single-phase ACD vacuum with two bypass motors that can be rolled out to the customer site, plugged into a standard 230 V outlet and put to work within minutes. The 380 m3/h and 250 mbar it delivers are plenty to pick up combustible dust from a milling setup, a polishing machine or a temporary installation, and the internal construction to IEC 60335-2-69 Annex AA keeps the dust container as Zone 20 wherever the engineer arrives.
Applications
- 3D-printing laboratories with metal powder from SLM and DMLS processes
- Dental technicians and jewellery workshops collecting precious-metal dust
- Field service tasks at customer sites with combustible process dust
- Temporary installations where permanent ATEX fit-out is impractical
- Pharmaceutical workshops with carcinogenic powders
Technical specifications
| ATEX marking | ACD EX 1/- D (intern konstruktion svarende til Zone 20 per IEC 60335-2-69 Annex AA) |
|---|---|
| Internal / external zone | 20 / ikke-ATEX |
| Motor type | 2 bypass-motorer i parallel (2 x 1,3 kW) |
| Duty cycle | Periodic |
| Airflow | 380 m³/h |
| Vacuum | 250 mbar (2550 mmH₂O) |
| Container | 45 L |
| Sound pressure | 72 dB(A) |
| Filter class | M class |
| Filter type | Stjernefilter antistatisk polyester klasse M, 15,000 cm2 (HEPA H14 22.000 cm2 som tilvalg) |
| Primary filter | Stjernefilter antistatisk polyester klasse M. 15.000 cm2 |
| Collection system | Synthetic safebag |
| Material | Lakeret staalkonstruktion, AISI 304 stoevbeholder |
| IP class | IP54 |
| Power | 2.6 kW |
| Voltage | 230 V / 50-60 Hz |
| Inlet | Ø 50 mm |
| Dimensions (L × W × H) | 550 x 620 x 1400 mm |
| Weight | 45 kg |
Questions and answers
Why is the Depureco MINIBULL ACD a better choice than a standard industrial vacuum?
Because combustible dust -- for example metal powder from 3D printing, precious-metal dust from dental work or fine aluminium swarf from CNC -- requires that the vacuum itself cannot be the ignition source. The Depureco MINIBULL ACD is built with a grounding chain, antistatic filter fabric and reinforced AISI 304 dust container, so any ignition inside the container is contained inside the container under IEC 60335-2-69 Annex AA.
Why this specific motor and phase configuration?
Two bypass motors in parallel (2 x 1.3 kW) deliver a combined 380 m3/h and 250 mbar -- close to a small three-phase side-channel. The advantage of single-phase is mobility: the Depureco MINIBULL ACD plugs into a standard 230 V outlet in any building without requiring a three-phase installation. The model is aimed at research environments and smaller workshops.
What types of dust is the Depureco MINIBULL ACD actually intended for?
Fine combustible dust in small to medium quantities: metal powder from additive manufacturing (aluminium, titanium, tool steel), polymer powders from SLS and MJF, fine aluminium swarf from CNC machining, precious-metal dust from dental and jewellery work, and organic laboratory dust. For reactive metal dust in larger quantities we recommend an INERT model with neutralising bath instead.
What is the difference between ACD and ATEX?
ACD (Appliance for Combustible Dust) covers vacuums for combustible dust in areas that are NOT ATEX-classified -- typically because the dust quantity or operating pattern does not trigger classification. ATEX vacuums are certified to the ATEX Directive 2014/34/EU and may be used in classified zones. If your lab or workshop has no zone classification but you still work with combustible dust, ACD is the correct category.
Which filter is fitted as standard, and can I upgrade to HEPA?
As standard the Depureco MINIBULL ACD is supplied with an antistatic polyester star filter in class M (15000 cm2) which handles common combustible dust. As an option, a HEPA H14 filter (22,000 cm2, 99.995 % efficiency at MPPS per EN 1822) is available and is required when the dust contains carcinogenic components, or when class H is mandated. The upgrade can be ordered at delivery or retrofitted later.
How mobile or stationary is it in practice?
The Depureco MINIBULL ACD weighs 45 kg and measures 550 x 620 x 1400 mm -- easy to roll between machines in a lab or workshop. Noise level is 72 dB(A), comparable to a normal office conversation at close range. Industrial wheels with brakes and a sturdy handle are standard. Power cable 5 m standard; extension up to 10 m available as an option.