ATEX Combi vacuum cleaner

Depureco AC 65 Z2/22

Pneumatic ATEX combined vacuum with venturi tube -- 65 L, 480 m3/h, wide star filter for longer service intervals

  • Two-operator process handling in Zone 22 with intermittent Zone 2 gas
  • Refinery maintenance with carbon-like granulate and light HC vapour
  • Pharma collection in pilot plants with combustible excipients
  • Chemical industry -- cleaning around pipe fittings and flanged joints
  • Metal finish shops handling lightly reactive dust + solvent vapour
Depureco AC 65 Z2/22 -- Pneumatic ATEX combined vacuum with venturi tube -- 65 L, 480 m3/h, wide star filter for longer service intervals
Certified to
  • ATEX Directive 2014/34/EU -- II 3D Ex h IIIC T140°C Dc -- II 3G Ex h IIB T3 Gc
  • EN 17348:2022 (harmonized March 2023)
  • IEC 60335-2-69 (industrial vacuums)

Depureco AC 65 Z2/22

The AC 65 Z2/22 is Depureco's mid-tier compressed-air vacuum: same ATEX certification as the MINIAIR (II 3D Ex h IIIC T140 Dc + II 3G Ex h IIB T3 Gc, Zone 22 dust + Zone 2 gas), but with a large venturi tube, 65 L container and a noticeably wider 24,000 cm2 star filter. It is the step-up for process plants where collection volume exceeds what a 45 L chassis can handle. 480 m3/h suction through the 80 mm tangential inlet improves pickup of heavy grains and lengthens the interval before the filter needs cleaning. Air consumption is paradoxically lower than the MINIAIR -- 1233 Nl/min at 6-8 bar versus the MINIAIR's 2500 -- because the venturi-tube design is more air-efficient than two separate ejectors. Noise level: 70 dB(A).

Applications

  • Two-operator process handling in Zone 22 with intermittent Zone 2 gas
  • Refinery maintenance with carbon-like granulate and light HC vapour
  • Pharma collection in pilot plants with combustible excipients
  • Chemical industry -- cleaning around pipe fittings and flanged joints
  • Metal finish shops handling lightly reactive dust + solvent vapour

Technical specifications

ATEX markingII 3D Ex h IIIC T140°C Dc -- II 3G Ex h IIB T3 Gc
Internal / external zone22 / 22
Motor typeVenturi-rør, pneumatisk drift (trykluft 6-8 bar)
Duty cycleContinuous
Airflow480 m³/h
Vacuum500 mbar (5097 mmH₂O)
Container65 L
Sound pressure70 dB(A)
Filter classM class
Filter typeStjernefilter antistatisk polyester klasse M, 24.000 cm2, manuel rens (H14 28.000 cm2 fiberglass som tilkob)
Primary filterStjernefilter antistatisk polyester klasse M, 24.000 cm2
Cleaning systemManuel filterrens
Collection systemDetachable container
MaterialLakeret staalkonstruktion, AISI 304 stoevbeholder
Air consumption1233 nl/min
Supply pressure6-8 bar
Air supply hoseØ 12 mm
Venturi units1 pcs
InletØ 80 mm
Dimensions (L × W × H)660 x 800 x 1200 mm
Weight64 kg

Questions and answers

Why is the model called AC?

AC stands for 'Aspiratore Compresso' -- Italian for compressed-air vacuum. It is Depureco's range of pneumatic venturi-based industrial vacuums. The AC number (65, 100, 250...) refers to the container size in litres.

Can I upgrade to AC 100 later?

Yes. The AC 65 and AC 100 Z2/22 share the same chassis footprint, the same ATEX certification and the same interface -- the only difference is container depth. Upgrade can be done as a container-swap at Depureco or at Particulair service. Contact us to evaluate your configuration.

Why is the filter only M class and not H14?

The AC range is primarily intended as a process collector where volume, not fineness, is the challenge. The M class star filter handles MPA-grade dust and is enough for most process rooms. If CMR substances or pharmaceuticals are handled, choose a variant with H14 -- see the AC 65 Z20/21, where HEPA is standard.

Can the AC 65 Z2/22 be used in Zone 1 gas?

No. The ATEX certification is only II 3G -- Gc EPL -- which covers Zone 2 gas (infrequent, short-term). Zone 1 gas requires Gb or Ga EPL, which is a different motor class (1/2G or 1G). If Zone 1 is needed, the solution should be a Delfin MTL 4533 or similar 2G-certified unit. Contact us for a recommendation.

Does the AC 65 use the same hoses as electric vacuums?

Yes. The suction hose is a 80 mm standard flange and can use all Depureco and third-party accessories with the 80 mm interface. The difference is the air line (12 mm quick-coupler) -- that is new compared to electric AC ranges.

Need advice on this model?