Tiger-Vac CWR-10 EX (CV) · Containment · ATEX zone 22

Compact containment vacuum for potent APIs in cleanrooms and ATEX zones

Tiger-Vac CWR-10 EX (CV) collects your dust in a sealed disposable canister that is disposed of whole, together with the suction hose. Nothing hazardous escapes, and nobody opens the canister by mistake. The vacuum is also marked ATEX II 3D for zone 22 and built to EN 17348 for combustible dust. It is compact, easy to move and available with a 12, 20 or 40 litre canister.

Request a quote See prices ›

From €7,990 excl. VAT and freight

Tiger-Vac CWR-10 EX (CV) on a cart with hose hanger in front of an isolator in a pharma cleanroomAI-generated
  • From €7,990 excl. VAT and freight
  • Fully closed: canister and hose are disposed of together
  • ATEX II 3D · zone 22
  • EN 17348 DT · combustible dust
  • 5 filter stages: HEPA in the canister + 2 × ULPA U15
  • ESD-safe
  • Indicator shows when the canister must be changed
  • Plug in the hose · no spillage after use
  • 12, 20 or 40 L canister
  • Cart with hose hanger, developed for Novartis
  • Compact: 46 × 76 cm (without cart)
  • Long-life Ametek® bypass motor

Containment

Closed from first suction to disposal

The most dangerous moment with a vacuum is when it has to be emptied. With the CWR-10 EX (CV), that moment does not exist.

  1. Dust goes straight into a sealed canister. The canister is stainless steel and has its own disposable bag and its own HEPA filter.
  2. The canister is never opened. When the indicator shows it is full, the whole canister is taken off, closed.
  3. The hose goes with it. The suction hose belongs to the canister and is disposed of with it. There is no used hose to clean.
  4. The plug closes the hose between jobs. The free end of the hose is closed with a plug. When the hose hangs on the cart, no dust falls out.
The free end of the suction hose closed with a plug, hanging on the cart's stainless steel hose hangerAI-generated
The hose closed with a plug on the cart's hose hanger.

Inside

The filter stays in the canister – ULPA U15 on the rest

Air is drawn into a disposable bag inside the sealed canister. Before the air leaves the canister, it passes a HEPA filter mounted inside the top of the canister. Bag and filter are disposed of with the canister as a closed system, so the filter that has held the substance never has to be changed on its own. The canister is closed at both ends, also when it is taken off.

The air then passes a double cloth filter. Finally, the motor head holds two ULPA U15 filters: one on the working air and one on the motor cooling air. This matters, because the cooling air from an ordinary vacuum can stir dust up into the room even when the working air is filtered. In total, the CWR-10 EX (CV) has five filter stages.

The motor is a long-life Ametek® bypass motor. It is EMI/RFI shielded and ESD-safe, and the hose and accessories are static conductive. An indicator lights up when the filter is blocked, so you know the canister is full and must be changed.

Cross-section of the Tiger-Vac CWR-10 EX (CV) with disposable bag, HEPA filter, double cloth filter, motor and two ULPA U15 filtersAI-generated
Cross-section of the CWR-10 EX (CV). Red: dust-laden air. Blue: filtered air.
  1. Disposable bag in the sealed canister
  2. Double cloth filter
  3. ULPA U15, one on the working air and one on the cooling air
  4. HEPA filter in the top of the canister
  5. Suction inlet
  6. Filter housing
  7. Filtered air out

Three sizes

Choose the canister by volume – containment is the same

The vacuum is the same in all three versions. Only the canister changes, and all three are fully closed disposable canisters in stainless steel.

The three sealed disposable canisters in stainless steel of 12, 20 and 40 litresAI-generated
12 LPart no. 110542B · for small amounts and frequent changes, e.g. isolator and laboratory work
20 LPart no. 110543B · the all-round size for daily cleaning in production
40 LPart no. 110544B · for larger amounts and longer intervals between changes
CWR-10 EX (CV) on the four-wheel cart and on the cart with hose hanger in a cleanroomAI-generated
Left: the four-wheel cart. Right: the cart with hose hanger.

Carts

Should your hose touch the floor?

The floor is one of the most contaminated surfaces in a cleanroom. A hose lying on the floor carries particles to the next room or the next batch. That is why the CWR-10 EX (CV) can be supplied on a cart with a hose hanger, where the hose hangs free, closed with its plug.

Cart with hose hanger · 216932A

Electropolished stainless steel AISI 304. The cart was developed for Novartis and has a handle and a hanger for the hose.

Four-wheel cart · 211688C

Electropolished stainless steel AISI 316 with four grey, conductive 4" wheels. The simple choice when the hose is stored elsewhere.

ATEX

The ATEX marking explained

Many potent substances are also combustible as dust. A containment vacuum therefore often has to protect the operator and be safe in an ATEX zone. The CWR-10 EX (CV) is marked as follows:

II 3D  Ex h tc IIIB T200°C Dc IP6X  ·  −5 °C ≤ Ta ≤ +37 °C
Part of the markingWhat it means
II 3DEquipment group II (not mining), category 3, dust. Category 3 corresponds to zone 22, where combustible dust occurs only rarely and for short periods.
Ex hThe non-electrical parts are protected to EN ISO 80079-36 and -37.
tcThe electrical parts are protected by a dust-tight enclosure, level c (EN 60079-31).
IIIBSuitable for combustible flyings (IIIA) and non-conductive dust (IIIB). Not for conductive dust (IIIC).
T200°CNo surface of the machine gets hotter than 200 °C in normal operation. The ignition temperature of the dust must be sufficiently above that (see questions and answers).
DcEquipment protection level (EPL) Dc, which belongs to zone 22.
IP6XDust-tight.
TaMay be used at room temperatures from −5 to +37 °C.

Inside: built to EN 17348, so it can contain combustible dust

The inside of a vacuum collecting combustible dust is where the dust cloud is densest. The CWR-10 EX (CV) is built to EN 17348:2022 for collecting combustible dust (DT, dry collection), so it can safely collect combustible substances inside. The same goes for static electricity: the whole system is ESD-safe and built to prevent electrostatic discharges, and the hose and accessories are static conductive.

Tiger-Vac declares conformity with the ATEX Directive 2014/34/EU according to EN 17348:2022, EN 60079-0, EN 60079-31, EN ISO 80079-36/-37 and EN 1127-1. For category 3 this is done by internal production control (Annex VIII of the Directive), as the Directive prescribes. Read more in ATEX ABC – before there are sparks, there are choices.

CWR-10 EX (CV) on the cart with hose hanger, parked close to the wall in a cleanroomAI-generated

Small footprint

Takes up almost no space – not even on the cart

Floor space in a cleanroom is expensive, and every square metre has to be cleaned. The vacuum itself stands on 46 × 76 cm, and on the cart with hose hanger it builds upwards instead of outwards.

The hose hangs vertically on the cart, so the vacuum can be parked close to the wall without blocking the corridor or access to the process equipment. It is ready when you need it and out of the way when you don't.

Because it takes up so little space, each room or line can have its own. Then it does not have to be moved through the airlock and shared between rooms, which reduces the risk of cross-contamination.

GMP · Contamination · Containment

Why containment is a GMP matter

Cross-contamination

EU GMP requires manufacturers to prevent one substance from ending up in another product. Since 2015, the acceptable limit has to be based on the substance's health-based exposure limit (HBEL). For highly potent substances that limit is so low that even small amounts of dust from an open vacuum or a hose on the floor are a real problem.

Contamination control strategy

The revised Annex 1 to EU GMP, in force since August 2023, requires an overall contamination control strategy (CCS). Cleaning equipment is part of it. A vacuum that can be opened, emptied and laid on the floor is a weak link in the strategy. A closed canister and a hose that hangs free with a plug in it are not.

Operator protection and OEB

Potent substances are often grouped into occupational exposure bands (OEB) by how low an airborne concentration the operator may be exposed to. There is no common statutory scale, so each company defines its own bands. What the high bands have in common is that open steps such as bag changes must be avoided. That is exactly the step the CWR-10 EX (CV) removes. Read more in How can OEB substances be so dangerous – without legal rules?

ATEX and potent substances at the same time

Many active substances and excipients are combustible as fine dust. When a room is both classified as an ATEX zone and handles potent substances, the vacuum has to meet both requirements. The CWR-10 EX (CV) does so in one compact machine.

In summary

Everything that normally takes several machines

No other compact vacuum combines all of this in one machine:

Full containmentSealed disposable canister that is never opened, and a hose that is disposed of with it
No spillage after usePlug in the free end of the hose, with a wire so it cannot get lost
The hose is kept off the floorCart with hose hanger, developed for Novartis
ATEXII 3D, zone 22, built to EN 17348
Cleanroom filtration5 filter stages: disposable bag and HEPA in the canister, double cloth filter and ULPA U15 on both working air and cooling air
ESD-safeThe whole system is built to prevent electrostatic discharges; conductive hose and accessories, EMI/RFI-shielded motor
IndicatorLight on the motor head shows when the canister is full and must be changed
Compact46 × 76 cm without cart, easy to move between rooms

Specifications

Technical data for the CWR-10 EX (CV)

CollectionDry only
Voltage230–240 V, 50 Hz, single phase
Power1050 W, 5 A
MotorAmetek® bypass, long life, EMI/RFI shielded and ESD-safe
Airflow189 m³/h
Vacuum2,180 mm H₂O
Sound level75 dB(A) to EN ISO 11203 (12 L)
Suction inletØ32 mm
Filtration5 stages: disposable bag and HEPA filter in the canister, double cloth filter, ULPA U15 on the working air and ULPA U15 on the cooling air in the motor head
IndicatorFilter blockage light: shows when the canister is full and must be changed
Dimensions (W × L)46 × 76 cm, without cart
Cable10 m, European plug
MaterialMachine in stainless steel AISI 304. Disposable canisters of 12 and 20 L in AISI 430, 40 L in stainless steel. Cart with hose hanger in AISI 304 and four-wheel cart in AISI 316, both electropolished
ESDESD-safe system, static conductive hose and accessories, EMI/RFI-shielded motor
ATEXII 3D Ex h tc IIIB T200°C Dc IP6X, −5 °C ≤ Ta ≤ +37 °C, EN 17348:2022

Included

First canister kit (sealed disposable canister with static conductive crushproof hose Ø32 mm × 3 m and plug), crevice tool (20 cm) and conical nozzle in conductive rubber (25 cm). Cable hook on the motor head.

Accessories

Cart with hose hanger 216932A (AISI 304, electropolished) · Four-wheel cart 211688C (AISI 316, electropolished, conductive wheels) · Extra hose Ø32 mm × 3 m with plug, 323427-10.

Extra disposable canisters with hose

12 L: 218112 · 20 L: 218113 · 40 L: 218114.

Models

ModelPart no.
CWR-10 EX (CV) 12L110542B
CWR-10 EX (CV) 20L110543B
CWR-10 EX (CV) 40L110544B

› See the product page for the CWR-10 EX (CV)

Prices

What does it cost – and what does a change cost?

The vacuum costs almost the same in all three sizes. What recurs over time is the canister kit, and it includes everything that has been in contact with the substance.

ItemPart no.Price excl. VAT and freight
CWR-10 EX (CV) with 12 L canister110542B€7,990
CWR-10 EX (CV) with 20 L canister110543B€8,040
CWR-10 EX (CV) with 40 L canister110544B€8,090
Canister kit 12 L218112€580
Canister kit 20 L218113€630
Canister kit 40 L218114€690
Cart with hose hanger, AISI 304216932A€5,170
Four-wheel cart, AISI 316211688C€1,150
Extra hose 3 m with plug323427-10€200

Calculate your cost per change

Fill in your own figures below, and the calculator also shows the working time you save.

Per month–
Per year–
Per working day (220 days)–

For that amount you get a new canister, new bag, new HEPA filter and a new hose every time – without anyone opening the canister or cleaning the equipment in full protective suits.

Canister kit: sealed disposable canister in stainless steel with the suction hose clamped to the inlet and a plug in the free end of the hoseAI-generated

What a canister kit includes

A complete, sealed disposable canister in stainless steel with built-in disposable bag and HEPA filter – and the suction hose, clamped to the canister inlet with a plug in the free end. When the canister is full, everything is disposed of together. No separate bags or filters are needed for the canister, and the hose does not need cleaning.

The vacuum is supplied with the first canister kit with hose and plug, crevice tool and conical nozzle. All prices are in euro excl. VAT and freight.

Questions and answers

What customers ask about the CWR-10 EX (CV)

What does it mean that the CWR-10 EX (CV) is a containment vacuum?

The collected material ends up in a sealed disposable canister in stainless steel, which is disposed of whole when full. The suction hose is disposed of with the canister. The canister is never opened or emptied, so the operator does not come into contact with the substance.

May the CWR-10 EX (CV) be used in ATEX zone 22?

Yes. The vacuum is marked II 3D Ex h tc IIIB T200°C Dc IP6X and built to EN 17348:2022 for collecting combustible dust. Category 3D corresponds to zone 22. It may be used for dust groups IIIA and IIIB, but not for conductive dust (IIIC).

Can it be used for all types of combustible dust?

No, only for non-conductive dust (IIIA and IIIB). In addition, the ignition temperature of the dust must be sufficiently above the machine's 200 °C. Under EN 60079-14, a dust cloud must have an ignition temperature of at least 300 °C, and a 5 mm dust layer a glow temperature of at least 275 °C. If you do not know the figures for your substance, ask us.

Which canister sizes are available?

Three: 12 L (part no. 110542B), 20 L (110543B) and 40 L (110544B). All three are fully closed disposable canisters, and the vacuum itself is the same.

How do we dispose of a full canister with potent APIs?

The canister is taken off closed. The hose stays on the inlet, and the plug is put in the free end. The canister is disposed of as one unit as hazardous waste according to your own procedures for the substance it contains. It must not be opened or emptied first. We are happy to help find the right waste route.

Why is there a plug in the hose?

When the hose is taken off and hangs on the cart after use, the plug closes the free end. The plug is attached to the hose with a wire so it does not get lost. That way no dust falls out of the hose between two jobs.

Why should the hose hang on a cart?

The floor is one of the most contaminated surfaces in a cleanroom. When the hose hangs on the cart's hose hanger, it never touches the floor and does not carry particles to the next room or the next batch.

What filtration does the CWR-10 EX (CV) have?

The CWR-10 EX (CV) has five filter stages. Inside the sealed canister there is a disposable bag and a HEPA filter, which are disposed of with the canister. The air then passes a double cloth filter, and the motor head holds two ULPA U15 filters, one on the working air and one on the motor cooling air. An indicator lights up when the filter is blocked, so you know the canister is full and must be changed.

What does the CWR-10 EX (CV) cost?

The vacuum costs from €7,990 with a 12 L canister, €8,040 with 20 L and €8,090 with 40 L. A new canister kit with hose costs €580, €630 or €690. All prices are excl. VAT and freight.

How much space does the CWR-10 EX (CV) take up?

The vacuum itself measures 46 × 76 cm. On the cart with hose hanger, the hose hangs vertically, so the vacuum can stand close to the wall without blocking the corridor.

Who supplies the CWR-10 EX (CV)?

Tiger-Vac manufactures the CWR-10 EX (CV) in Italy. Particulair in Karlslunde, Denmark, supplies it and helps choose the canister size and cart for the task.

Can the CWR-10 EX (CV) pick up liquids?

No. The model is for dry collection only.

Shall we look at your task?

Tell us which substance you handle, what zone the room is, and how much needs to be collected. Then we will find the right canister size and the right cart.

Thomas Lyngskjold · +45 2022 8272 · thl@particulair.com
Particulair · Højtoften 12 · DK-2690 Karlslunde · +45 7023 1203 · sales@particulair.com

Request a quote
Particulair is ready to help with your task

The information on this page is based on the manufacturer's documentation for the Tiger-Vac CWR-10 EX (CV) and may change without notice. Images are illustrations and may differ from the equipment supplied. Whether the vacuum suits a particular zone and a particular substance is always decided on the basis of your own zone classification, the substance data and the product documentation. This page is not legal or regulatory advice; contact us for an assessment of your task.

Other Particulair universes