All products
Complete overview of all hoses and accessories across the six categories. Filter on property and standard to find the right product — including when requirements cut across categories.
Most hose decisions start with a category — ATEX, food, high-temperature. But sometimes you don't know which category your product belongs to, or your requirement spans multiple: an antistatic hose that must also be food-grade, or an abrasion-resistant hose that also has to handle 80 °C cleaning.
This page is the unified entry point to Particulair's complete catalogue — across the critical environments we work in. Filter on category, property or standard in the left column — or combine multiple filters to find hoses that satisfy several requirements at once.
If you know which category you need, the category pages are a faster route — they have deeper introductions, thematic sections and category-specific FAQs. Use the navigation at the top.
Products
2-ear pincher klemme
2-ear pincher clamp - simple and robust crimp construction for light installation
- Inner Ø: 12-30 mm
3-vejs kugleventil type 128
3-way ball valve type 128 - for process installations where flow must be selectable between 3 ports
- Inner Ø: 13-25 mm
3-vejs kugleventil type 129
3-way ball valve type 129 - alternative to type 128 with different configuration
- Inner Ø: 13-25 mm
ABA worm-drive slangeklemme
ABA worm-drive hose clamp - Swedish-developed with stainless steel band, widely used
- Inner Ø: 10-80 mm
ABA worm-drive variant (SKU 6060)
ABA worm-drive variant SKU 6060 - Swedish-developed
- Inner Ø: 20-20 mm
ABA worm-drive variant (SKU 6062)
ABA worm-drive variant SKU 6062 - Swedish-developed
- Inner Ø: 20-20 mm
AGRIFLAT
High-tensile-strength layflat water hose — for water, firefighting, slurry and discharge handling
- Inner Ø: 20-203 mm
- Temp: -20 to +80 °C
AIRBRAKE
EPDM compressed air brake hose per DIN 74310:1993, -40 to +70 C
- Inner Ø: 11-13 mm
- Temp: -40 to +70 °C
AIRDUC PUR 352 SE RAILWAY PLUS (MD)
Fire-safe PUR suction and pressure hose per EN 45545-2 for railway and marine
- Inner Ø: 20-50 mm
- Temp: -40 to +90 °C
AIRDUC PVC 345 (HD)
Heavy-duty PVC suction and pressure hose for industrial dust and powder extraction
- Inner Ø: 20-350 mm
- Temp: -20 to +70 °C
AIRDUC® PUR 350 FOOD-AS (MD)
Food-grade antistatic polyurethane hose for pneumatic conveying of flour, grain and pharmaceutical products
- Inner Ø: 25.1-500 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
AIRDUC® PUR 352 SE (MD)
Flame-retardant polyurethane hose for ventilation, heating and plumbing in rail vehicles and ships
- Inner Ø: 20-450 mm
- Temp: -40 to +90 °C
AIRDUC® PUR 355 VAC-TRUCK ORANGE
Reinforced vacuum truck hose in polyurethane, microbe-resistant, for suction excavators and sweeping machines
- Inner Ø: 202.3-250 mm
- Temp: -40 to +90 °C
AIRDUC® PUR 356 EC (XHD)
Conductive extra-heavy-duty polyurethane hose for extremely abrasive media in ATEX zones
- Inner Ø: 32-100 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
AIRDUC® PUR 357 VAC-TRUCK
Extremely abrasion-resistant vacuum truck hose with very high pressure, vacuum and compression resistance
- Inner Ø: 100-250 mm
- Temp: -40 to +90 °C
AIRDUC® PE 362 EC (MD)
Conductive PE hose for chemical industry and ATEX zones — Zone 0·1·2 + Zone 20·21·22
- Inner Ø: 28-250 mm
- Temp: -35 to +80 °C
- Standards: ATEX 2014/34/EU, TRGS 727
AIRDUC® PE 362 FOOD (MD)
Food-grade PE suction and pressure hose — chemical-resistant, for food and pharma industry
- Inner Ø: 25-250 mm
- Temp: -35 to +80 °C
- Standards: EU 10/2011
AIRDUC® PUR 350 AS (MD)
Lightweight antistatic PUR hose for pneumatic transport in ATEX zones
- Inner Ø: 25.1-500 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727, DIN 26057
AIRDUC® PUR 350 AS BLACK (MD)
Antistatic polyurethane hose in black for ATEX zones and demanding industrial duty
- Inner Ø: 20-300 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727, DIN 26057
AIRDUC® PUR 351 EC (MD)
Electrically conductive polyurethane hose for ATEX zones
- Inner Ø: 25.1-315 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727, DIN 26057
AIRDUC® PUR 351 FOOD (MD)
Food-grade polyurethane hose for abrasive media
- Inner Ø: 19-500 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011, FDA 21 CFR
AIRDUC® PUR 351 HT (MD)
Abrasion-resistant high-temperature PUR hose — up to +150 °C peak, flexible at low temperatures
- Inner Ø: 25.1-350 mm
- Temp: -40 to +125 °C
AIRDUC® PUR 352 SE RAILWAY (MD)
Self-extinguishing EN 45545-2 railway hose — abrasion-resistant PUR for ventilation, heating and sanitary systems
- Inner Ø: 20-125 mm
- Temp: -40 to +90 °C
AIRDUC® PUR 355 AS (HD)
Antistatic heavy-duty polyurethane hose for abrasive media in ATEX zones
- Inner Ø: 13-500 mm
- Standards: ATEX 2014/34/EU, TRGS 727, DIN 26057
AIRDUC® PUR 355 EC (HD)
Conductive heavy-duty polyurethane hose for abrasive media in ATEX zones
- Inner Ø: 20-110 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727, DIN 26057
AIRDUC® PUR 355 FISH (HD)
Heavy-duty PUR hose specifically for aquaculture and fish farming
- Inner Ø: 101.5-500 mm
- Temp: -40 to +90 °C
AIRDUC® PUR 355 FOOD (HD)
Heavy-duty food-grade PUR hose for abrasive media
- Inner Ø: 13-400 mm
- Standards: EU 1935/2004, EU 10/2011, FDA 21 CFR
AIRDUC® PUR 355 HT (HD)
Heavy-duty PUR hose for abrasive media at elevated temperatures
- Inner Ø: 25.1-400 mm
- Temp: -40 to +100 °C
- Standards: DIN 26057
AIRDUC® PUR 355 SWEEPER
Highly flexible sweeper hose with protected exterior folds for municipal vehicles
- Inner Ø: 151.5-275 mm
AIRDUC® PUR 355 SWEEPER REINFORCED
Reinforced sweeper hose for hard-duty operation on municipal sweeping vehicles
- Inner Ø: 203-205 mm
- Temp: -40 to +90 °C
AIRDUC® PUR 355 VAC-TRUCK REINFORCED
Reinforced suction hose for industrial vacuum trucks and collection vehicles
- Inner Ø: 85-152 mm
- Temp: -40 to +90 °C
AIRDUC® PUR 356 AS (XHD)
Antistatic extra heavy-duty PUR hose for the toughest media in ATEX zones
- Inner Ø: 32-300 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727, DIN 26057
AIRDUC® PUR 356 FOOD (XHD)
Extra heavy-duty food-grade PUR hose for high throughputs of abrasive food media
- Inner Ø: 32-152 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011, FDA 21 CFR
AIRDUC® PUR 356 FOOD REINFORCED (XXHD)
Extreme heavy-duty food hose — XXHD construction for high throughput of strongly abrasive foods
- Inner Ø: 50-50 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
AIRDUC® PUR 356 HT (XHD)
Heavy-duty high-temperature PUR hose — XHD construction for hot abrasive media at high throughput
- Inner Ø: 32-127 mm
- Temp: -40 to +125 °C
AIRDUC® PUR-INOX 351 FOOD-AS (MD)
Antistatic PUR hose with stainless steel spiral — food-grade for ATEX zones
- Inner Ø: 25.1-250 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
AIRDUC® PUR-INOX 355 FOOD-AS (HD)
Antistatic food-grade heavy-duty PUR hose with stainless steel spiral
- Inner Ø: 25.1-202.3 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011, FDA 21 CFR
AIRDUC® PUR-INOX 356 FOOD-AS (XHD)
Extremely abrasion-resistant food hose — antistatic, INOX spiral, for the most abrasive bulk foods
- Inner Ø: 32-200 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
AIRDUC® PVC 341 (MD)
Flame-retardant PVC suction and pressure hose — MD construction for industrial extraction and powder pneumatics
- Inner Ø: 20-350 mm
- Temp: -20 to +70 °C
AIRDUC® TPE 363 (MD)
Suction and pressure hose for hot and cold gases — TPE up to +150 °C, for granulate dryers
- Inner Ø: 25-300 mm
- Temp: -40 to +125 °C
AIRFLEX®/PU/AS/FOOD
Highly flexible food hose — antistatic, mirror-smooth interior, for all EU food simulants
- Inner Ø: 32-102 mm
- Temp: -25 to +85 °C
- Standards: EU 1935/2004, EU 10/2011
ARIACORD/YELLOW
Robust EPDM compressed air and water hose, 25 bar PN, weather and UV-resistant
- Inner Ø: 32-76 mm
- Temp: -30 to +80 °C
ARIAFORM/15
Medium-duty TPE air hose for industry and workshop
- Inner Ø: 16-25 mm
- Temp: -30 to +80 °C
ARIAFORM/DIN
Robust TPE air hose per DIN standard
- Inner Ø: 6-25 mm
- Temp: -30 to +80 °C
ARIAFORM/TPU
Lightweight polyurethane air hose for tools and reel systems
- Inner Ø: 6-13 mm
- Temp: -30 to +80 °C
ARIAFORM/YELLOW
Heavy-duty TPE air hose for industry and production
- Inner Ø: 13-25 mm
- Temp: -30 to +80 °C
ARMOFLEX/OIL
Highly flexible suction and pressure hose for oil, petrol and chemicals
- Inner Ø: 25-51 mm
- Temp: -15 to +65 °C
ARMOFLEX/PU/FOOD
Food-certified PU suction and pressure hose for liquid and dry foodstuffs
- Inner Ø: 38-51 mm
- Temp: -25 to +85 °C
ARMOFLEX®
Robust food hose — abrasion-resistant soft PVC for liquid foods, sludge and slurry under harsh conditions
- Inner Ø: 10-152 mm
- Temp: -25 to +60 °C
BAND-IT assembly tool
BAND-IT assembly tool - special tool for making BAND-IT crimp couplings
BAND-IT buckles og tool
BAND-IT buckles + tool set - for complete BAND-IT crimp coupling
- Inner Ø: 9.5-15.9 mm
BAND-IT strapping band
BAND-IT strapping band - stainless steel strap for crimp-based coupling system
- Inner Ø: 9.5-15.9 mm
BARDUC PVC 381 FOOD (HD)
Heavy-duty PVC food-grade suction/pressure hose, EU 10/2011 Cat A-D1, 25 dimensions
- Inner Ø: 10-101.5 mm
- Temp: -20 to +70 °C
- Standards: EU 1935/2004, EU 10/2011
BARDUC® PUR-INOX 382 FOOD-AS (XHD)
Food-grade antistatic extra-heavy-duty bulk hose with stainless steel spiral
- Inner Ø: 32-100 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
BETONCORD/10
Wear-resistant concrete injector hose, conductive, 10 bar PN, abrasion 70 mm3
- Inner Ø: 60-63 mm
- Temp: -30 to +80 °C
BETONCORD®/40
Abrasion-resistant concrete injection hose — 40 bar pressure class, for mortar and wet-abrasive media
- Inner Ø: 25-63.5 mm
- Temp: -20 to +60 °C
BOSS damp-kobling variant (SKU 5410)
BOSS steam coupling variant SKU 5410 - alternative configuration to canonical 5411
- Inner Ø: 25-25 mm
BOSS damp-slange-kobling
BOSS steam hose coupling for high-pressure steam - galvanised/cast steel, max 210 deg C, NPT/ANSI
- Inner Ø: 19-38 mm
BOSS sikrings-klemme til damp
BOSS high-pressure steam hose safety clamp - 2 safety claws, galvanised forged steel
- Inner Ø: 25-38 mm
Bauer kobling-system
Bauer coupling system with O-sealing ring in SBR (type S 4) - for agriculture and slurry transport
- Inner Ø: 65-152 mm
Bauer variant (SKU 5710)
Bauer variant SKU 5710 - agriculture and slurry, SBR seal
- Inner Ø: 100-100 mm
Bauer variant (SKU 5711)
Bauer variant SKU 5711 - agriculture and slurry, SBR seal
- Inner Ø: 100-100 mm
CALORFORM
Highly flexible hot water hose — chemical-resistant, for construction sites, industry and marine
- Inner Ø: 10-25 mm
- Temp: -40 to +95 °C
CARBOCORD®/10
Conductive oil and petrol hose — discharge only, for loading unleaded fuels
- Inner Ø: 32-75 mm
- Temp: -40 to +90 °C
CARBOCORD®/EN
Oil- and petrol-resistant pressure hose — weather-resistant, for fuel in vehicles
- Inner Ø: 32-100 mm
- Temp: -35 to +90 °C
CARBOFLAT®
Flat collapsible fuel hose — UV- and weather-resistant, for ship bunkering
- Inner Ø: 75-203 mm
- Temp: -35 to +80 °C
- Standards: REACH, RoHS
CARBOFLEX®/EN
Oil-resistant suction and pressure hose — conductive, for fuel in tanks, ships and industry
- Inner Ø: 25-100 mm
- Temp: -40 to +90 °C
CARBOFLEX®/GRECATO
Oil-resistant suction and pressure hose — extremely small bend radius, for fuel and hydraulic
- Inner Ø: 19-102 mm
- Temp: -35 to +80 °C
CARBOFLEX®/OHM/10
Conductive oil and petrol hose — robust 10 bar working pressure for demanding industrial cleaning
- Inner Ø: 25-152 mm
- Temp: -40 to +90 °C
CARBOFLEX®/U.L./OHM
Conductive oil and petrol suction/discharge hose — for industrial cleaning and tank transport
- Inner Ø: 51-152 mm
- Temp: -40 to +90 °C
CARBOFORM®/EN/ISO
Flame-retardant self-extinguishing fuel hose — for leisure boats and yachts
- Inner Ø: 6-19 mm
- Temp: -35 to +80 °C
CARBOFORM®/PD
Conductive fuel hose for petrol pumps — EN 1360, 16 bar, for petrol and oil
- Inner Ø: 15-25 mm
- Temp: -30 to +90 °C
CLAMP 208
Light-duty hose clamp for hoses with smooth outer wall, quick to fit, reusable
- Inner Ø: 8-220 mm
CLAMP 208 variant (SKU 2089230)
CLAMP 208 variant SKU 2089230 - variant of existing family (canonical: clamp-208)
CLAMP 210 BRIDGE
Bridge clamp with plastic bridge for externally corrugated spiral hoses
- Inner Ø: 25-200 mm
CLAMP 211
T-bolt clamp for heavy-duty hoses with smooth outer wall, quick to fit, reusable
- Inner Ø: 17-270 mm
CLAMP 211 variant (SKU 2119200)
CLAMP 211 variant SKU 2119200 - forsteflade-finish, T-bolt construction
- Inner Ø: 50-50 mm
CLAMP 211 variant (SKU 2119230)
CLAMP 211 variant SKU 2119230 - alternativ finish, T-bolt construction
- Inner Ø: 50-50 mm
CLAMP 212
Bridge clamp for externally corrugated spiral hoses, quick to fit, reusable
- Inner Ø: 9-235 mm
CLAMP 212 EC
Bridge clamp with integral grounding for ATEX/ESD installations on corrugated hoses
- Inner Ø: 27-395 mm
CLAMP 212 variant (SKU 2122002)
CLAMP 212 variant SKU 2122002 - variant of existing family (canonical: clamp-212)
CLAMP 213
Bridge clamp with quick-release closure - quick disassembly without tools
- Inner Ø: 50-400 mm
CLAMP 216
Heavy-duty stainless clamp for corrugated hoses - watertight mounting, quick, reusable
- Inner Ø: 42-400 mm
CLAMP 216 variant (SKU 2162010)
CLAMP 216 variant SKU 2162010 - heavy-duty stainless for corrugated hoses
- Inner Ø: 80-80 mm
CLAMP 216 variant (SKU 2162872)
CLAMP 216 variant SKU 2162872 - heavy-duty stainless for corrugated hoses
- Inner Ø: 80-80 mm
CONNECT 202
Bayonet lock in stainless steel for metal hoses - cylindrical lock with L-slot
- Inner Ø: 50-300 mm
CONNECT 203-204
Cylindrical stainless adapters for metal hoses - 203 and 204 in same dimension range
- Inner Ø: 40-300 mm
CONNECT 204 slotted variant (SKU 2041100)
CONNECT 204 slotted variant SKU 2041100 - variant of existing family (canonical: connect-203-204)
CONNECT 206
Stainless quick coupling for metal hoses with multiple clamping brackets
- Inner Ø: 100-300 mm
CONNECT 206 quick coupling variant (SKU 2062016)
CONNECT 206 quick coupling variant SKU 2062016 - variant of existing family (canonical: connect-206)
CONNECT 223 krympemuffe
CONNECT 223 shrink sleeve - thermally shrinking sleeve for permanent hose-to-stutsen joint
- Inner Ø: 25-80 mm
CONNECT 226
Screw-on soft sleeve for SUPERFLEX 372 - chemically resistant, quick, reusable
- Inner Ø: 25-76 mm
- Temp: -20.0 to +70.0 °C
CONNECT 227
Screw-on soft sleeve for EVA hoses - chemically resistant, grey, reusable
- Inner Ø: 32-50 mm
- Temp: -20.0 to +70.0 °C
CONNECT 228 clamp protection tape
CONNECT 228 polyurethane clamp protection tape - chemical- and abrasion-resistant, high-temp 125 deg C
- Inner Ø: 50-100 mm
CONNECT 240
Screw-on soft sleeve for the AIRDUC series - abrasion- and chemical-resistant
- Inner Ø: 38-70 mm
- Temp: -40.0 to +90.0 °C
CONNECT 240 + 241 FOOD
Food-grade soft slide-on sleeve - EU 10/2011, EC 1935/2004, abrasion- and chemical-resistant
- Inner Ø: 38-70 mm
CONNECT 240 EC
Electrically conductive soft sleeve for AIRDUC EC/AS series - chemical-, microbe-, hydrolysis-resistant
- Inner Ø: 38-60 mm
- Temp: -40.0 to +90.0 °C
CONNECT 241 AS Moulded
Antistatic moulded soft sleeve <10⁹ Ω - for industrial vacuum cleaners and municipal vehicles
- Inner Ø: 38-75 mm
- Temp: -40.0 to +90.0 °C
CONNECT 241 FOOD
Food-grade soft sleeve - 9 larger dimensions ID 32 to 300 mm for AIRDUC catalogue's process range
- Inner Ø: 32-300 mm
- Temp: -40.0 to +90.0 °C
CONNECT 241 FOOD FOR 356
Food-grade soft sleeve specifically for the AIRDUC PUR 356 XHD series' heavier wall thickness
- Inner Ø: 40-80 mm
- Temp: -40.0 to +90.0 °C
CONNECT 241 FOOD Moulded
Pre-fitted moulded food-grade sleeve - gas and liquid tight, factory-assembled
- Inner Ø: 32-100 mm
- Temp: -40.0 to +90.0 °C
CONNECT 242
Threaded adapter (DIN ISO 228) - abrasion- and chemical-resistant, black, 2 to 6 inch thread
- Inner Ø: 50-150 mm
- Temp: -40.0 to +90.0 °C
CONNECT 242 Moulded
CONNECT 242 Moulded - pre-fitted threaded adapter for AIRDUC series, factory-assembled
- Inner Ø: 50-100 mm
CONNECT 242 threaded adapter variant (SKU 2428501)
CONNECT 242 threaded adapter variant SKU 2428501 - variant of existing family (canonical: connect-242)
CONNECT 243
Flanged pipe for ventilation pipe systems - galvanised, abrasion- and chemical-resistant, black
- Inner Ø: 80-250 mm
CONNECT 243 flanged pipe variant (SKU 2438501)
CONNECT 243 flanged pipe variant SKU 2438501 - variant of existing family (canonical: connect-243)
CONNECT 243 flanged pipe variant (SKU 2438551)
CONNECT 243 flanged pipe variant SKU 2438551 - variant of existing family (canonical: connect-243)
CONNECT 244
2-part loose flange per DIN 2632/2633 - PP/steel construction for AIRDUC 356 series
- Inner Ø: 50-300 mm
- Temp: -40.0 to +90.0 °C
CONNECT 246 AS
Antistatic spiral hose connector - <10⁹ Ω, ideal for industrial vacuum cleaners and dust extraction
- Inner Ø: 25-100 mm
- Temp: -40.0 to +90.0 °C
CONNECT 270-271
Metal hose connector / reducer - screw-on version, reusable, up to +200 deg C
- Inner Ø: 50-250 mm
CONNECT DAIRY 247
Dairy tube support per DIN 2826/11851 - stainless steel AISI 304/316Ti, ideal for vacuum and dosing
- Inner Ø: 25-101 mm
- Temp: -40.0 to +90.0 °C
CONNECT DAIRY 247 variant (SKU 2472911)
Dairy fitting 247 variant SKU 2472911 - DIN 11851, AISI 304/316Ti
- Inner Ø: 50-50 mm
CONNECT DAIRY 247 variant (SKU 2472912)
Dairy fitting 247 variant SKU 2472912 - DIN 11851, AISI 304/316Ti
- Inner Ø: 50-50 mm
CONNECT DAIRY 247 variant (SKU 2472913)
Dairy fitting 247 variant SKU 2472913 - DIN 11851, AISI 304/316Ti
- Inner Ø: 50-50 mm
CONNECT KAMLOK ALU 253
Kamlok system spare parts set (lever + ring + pin) in stainless steel 1.4301
CONNECT PRESS ASSEMBLY 232
Press assembly for BARDUC 382 - food-grade FDA + EU 10/2011, for vacuum and dosing
- Inner Ø: 50-65 mm
- Temp: -40.0 to +90.0 °C
CONNECT STORZ DIN ALU 251
Storz system adapter with female thread - aluminium, BSPP/G-thread, 16 bar
- Inner Ø: 31-115 mm
CONNECT STORZ SAFETY 8511
Storz system safety clamp with joint, rubber cover and adjustable lock - 3 sizes A/B/C
- Inner Ø: 66-133 mm
CONNECT Safety Clamp Assembly
CONNECT Safety Clamp Assembly - safety clamp assembly for critical coupling installations
- Inner Ø: 50-80 mm
CONNECT Safety Clamp Assembly variant (SKU 2312921)
CONNECT Safety Clamp Assembly variant SKU 2312921 - variant of existing family (canonical: connect-safety-cl-assembly)
CONNECT THREAD FITTING 234
Threaded adapter DIN ISO 228 for AIRDUC food/pharma - stainless steel 1.4301
- Inner Ø: 25-100 mm
- Temp: -40.0 to +90.0 °C
CONNECT TRI-CLAMP 245
Sanitary tri-clamp fitting for food and pharma - DIN 32676, AISI 316L
- Inner Ø: 25-151 mm
- Temp: -40.0 to +90.0 °C
CONNECT Tri-Clamp 245 fitting (variant 2923)
Tri-Clamp 245 fitting variant 2923 - alternative configuration to the 2914 version
- Inner Ø: 50-80 mm
CONNECT Tri-Clamp 245 reservepakning
Replacement gasket for Tri-Clamp 245 fitting (DIN 32676) - food-grade silicone or EPDM
- Inner Ø: 25-100 mm
CONNECT Tri-Clamp 245 svejse-stutsen
Tri-Clamp 245 socket for welding per DIN 32676 - for permanent integration in process tanks
- Inner Ø: 25-100 mm
CORROSIV®/EN
Chemical-resistant EPDM hose for acids and alkalis at high concentration
- Inner Ø: 19-50 mm
- Standards: REACH, RoHS
CORROSIV®/SP/EN
Premium chemical-resistant EPDM hose for the most aggressive media
- Inner Ø: 25-100 mm
- Temp: -40 to +90 °C
- Standards: REACH, RoHS
COSMO
Lightweight PVC vacuum hose for water suction applications, transparent green
- Inner Ø: 20-102 mm
- Temp: -15 to +60 °C
CP ARAMID 461
High-temperature clamp profile with aramid wall — up to +300 °C, flame-retardant M1/B1
- Inner Ø: 38-508 mm
- Temp: -60 to +260 °C
- Standards: REACH, RoHS
CP ARAMID 461 PROTECT
High-temperature clamp profile hose — engine exhaust extraction up to +300 °C, M1 fire class
- Inner Ø: 75.6-250 mm
- Temp: 0 to +300 °C
CP HYP 450
Vibration-resistant HYP clamp profile hose — chemical-resistant, heat-resistant up to +170 °C
- Inner Ø: 38-1000 mm
- Temp: -40 to +150 °C
- Standards: REACH, RoHS
CP HYP 450 PROTECT
Vibration-resistant exhaust hose — protection profile, up to +200 °C
- Inner Ø: 75.6-254 mm
- Temp: 0 to +200 °C
CP HiTex 481
Double-layered high-temperature hose with clamp profile up to 700 °C peak
- Inner Ø: 50.5-800 mm
CP HiTex 483
Multi-layered extra-high-temperature hose with clamp profile up to 1100 °C peak
- Inner Ø: 101.5-500 mm
- Temp: -60 to +900 °C
CP HiTex® 467 WELDING
Specialised high-temperature hose for welding fume extraction
- Inner Ø: 50-200 mm
- Temp: -60 to +280 °C
CP HiTex® 480
High-temperature clamp profile hose for smaller dimensions
- Inner Ø: 38-1016 mm
- Temp: -60 to +280 °C
CP HiTex® 485
High-temperature clamp profile hose for medium-sized installations
- Inner Ø: 101.5-350 mm
- Temp: -60 to +400 °C
CP HiTex® 486
High-temperature clamp profile hose for larger dimensions and high throughput
- Inner Ø: 92-400 mm
- Temp: -60 to +400 °C
CP HiTex® 487
Highly flexible high-temperature hose with steel spiral and clamp profile
- Inner Ø: 75.6-450 mm
- Temp: -60 to +450 °C
CP PE 457
Highly flexible PE clamp profile hose — extreme chemical resistance for large dimensions
- Inner Ø: 40-1000 mm
- Temp: -35 to +70 °C
- Standards: REACH, RoHS
CP PE 457 EC
Highly flexible clamp profile hose in polyethylene, electrically conductive, chemical-resistant and ATEX-approved
- Inner Ø: 50.5-800 mm
- Temp: -35 to +80 °C
- Standards: REACH, RoHS
CP PTFE-INOX 475 EC
ATEX-approved PTFE-INOX clamp hose — conductive, up to +250 °C, for extraction arms and ATEX zones
- Inner Ø: 50.5-325 mm
- Temp: -150 to +250 °C
- Standards: REACH, RoHS
CP PTFE-INOX 475 FOOD
PTFE food hose — up to +270 °C, extreme chemical resistance, for pharma and food
- Inner Ø: 50.5-600 mm
- Temp: -40 to +250 °C
- Standards: REACH, RoHS
CP PTFE/GLASS-INOX 471
Double-layer clamp profile PTFE/glass-INOX hose — anti-adhesive, up to +270 °C, chemical-resistant
- Inner Ø: 50.5-700 mm
- Temp: 0 to +260 °C
- Standards: REACH, RoHS
CP PTFE/GLASS-INOX 471 EC
ATEX-approved PTFE/glass-INOX double-layer hose — conductive, up to +250 °C, for vapour recovery
- Inner Ø: 50.5-300 mm
- Temp: -150 to +250 °C
- Standards: REACH, RoHS
CP PTFE/HYP-INOX 472
PTFE/HYP-INOX double-layer clamp hose — anti-adhesive, up to +170 °C, chemical-resistant
- Inner Ø: 50.5-500 mm
- Temp: 0 to +170 °C
- Standards: REACH, RoHS
CP PTFE/HYP-INOX 472 EC
ATEX-approved PTFE/HYP-INOX clamp hose — conductive, up to +170 °C, for explosion hazard zones
- Inner Ø: 50.5-600 mm
- Temp: -40 to +170 °C
- Standards: REACH, RoHS
CP PUR 455 FOOD
Food hose with clamp profile — galvanised steel spiral, for large-scale bulk conveying
- Inner Ø: 50.5-1000 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
CP PVC 465
Flame-retardant clamp profile hose — fabric-reinforced, chemical-resistant, for extraction arms and welding fume
- Inner Ø: 38-900 mm
- Temp: -10 to +80 °C
CP PVC 465 AS
Antistatic PVC clamp profile hose — fabric-reinforced, for welding fume extraction and chemical vapours
- Inner Ø: 50.5-800 mm
- Temp: -10 to +80 °C
- Standards: REACH, RoHS
CP PVC 466 HT
High-temperature clamp profile PVC hose — flame-retardant NF P 92-503 M1, up to +110 °C
- Inner Ø: 38-700 mm
- Temp: -10 to +110 °C
CP SIL 460
Silicone clamp profile hose — flame-retardant, heat-resistant up to +280 °C
- Inner Ø: 50.5-750 mm
- Temp: -30 to +250 °C
- Standards: REACH, RoHS
CP VITON® 459 EC
Conductive Viton®-lined hose for extreme chemicals at high temperatures
- Inner Ø: 38-712 mm
- Temp: -40 to +200 °C
- Standards: REACH, RoHS
DELTAFLEX
Flexible SBR suction hose for water and slurry in agriculture and sewage
- Inner Ø: 50-254 mm
- Temp: -30 to +85 °C
DVGW gas-kugleventil
DVGW gas-approved ball valve - for natural gas, propane and industrial gas installations
- Inner Ø: 13-25 mm
Dobbelt-nippel
Double nipple - male-male thread adapter to connect two female pipe connections
- Inner Ø: 13-25 mm
EUROLON
PVC lay-flat hose for water supply, drainage and irrigation
- Inner Ø: 25-203 mm
- Temp: -20 to +60 °C
EVA 373
Highly flexible suction hose for industrial vacuum cleaners and cleaning
- Inner Ø: 20-60 mm
- Temp: -20 to +65 °C
EVA 373 AS
Antistatic EVA suction hose — chemical-resistant, crush-resistant, for vacuum and cleaning
- Inner Ø: 20-60 mm
- Temp: -25 to +65 °C
- Standards: ATEX 2014/34/EU, TRGS 727
EVA 373 EC
Conductive suction hose (EC) for ATEX applications
- Inner Ø: 25-70 mm
- Temp: -20 to +65 °C
Europa fjeder-belastet kontraventil
Europa spring-loaded check valve with female thread on both sides - brass body, NBR seal
- Inner Ø: 13-50 mm
Festflansch (fast flange)
Festflansch (fixed flange) - welded or built onto pipe end
- Inner Ø: 80-150 mm
Festflansch variant (SKU 5614)
Festflansch variant SKU 5614 - variant of existing family
GEKA elbow / specialfitting (SKU 5354)
GEKA system variant SKU 5354 - elbow / specialfitting, brass/NBR
GEKA hose tail med securing ring
GEKA hose tail with securing ring - brass, for suction and high-pressure applications, 25 bar
- Inner Ø: 13-32 mm
GEKA hose tail variant (SKU 5310)
GEKA system variant SKU 5310 - hose tail variant, brass/NBR
GEKA hose tail variant (SKU 5311)
GEKA system variant SKU 5311 - hose tail variant, brass/NBR
GEKA hose tail variant (SKU 5312)
GEKA system variant SKU 5312 - hose tail variant, brass/NBR
GEKA hose tail variant (SKU 5313)
GEKA system variant SKU 5313 - hose tail variant, brass/NBR
GEKA hose tail variant (SKU 5314)
GEKA system variant SKU 5314 - hose tail variant, brass/NBR
GEKA hose tail variant (SKU 5315)
GEKA system variant SKU 5315 - hose tail variant, brass/NBR
GEKA plus drikkevands-blank cap
GEKA plus blank cap (DVGW VP 550) for potable water installations - brass red-brown, 40 bar
- Inner Ø: 40-40 mm
- Temp: -5.0 to +90.0 °C
GEKA plus variant (SKU 5355)
GEKA plus variant SKU 5355 - DVGW-approved, potable-water compatible
GEKA plus variant (SKU 5356)
GEKA plus variant SKU 5356 - DVGW-approved, potable-water compatible
GEKA plus variant (SKU 5357)
GEKA plus variant SKU 5357 - DVGW-approved, potable-water compatible
GOLDSCHLANGE
Robust EPDM water hose with CR outer layer - kink, impact and drive-over resistant
- Inner Ø: 13-25 mm
- Temp: -30 to +100 °C
Guillemin kobling-system
Guillemin coupling system (NBR seal) - French standard for water and fire brigade applications
- Inner Ø: 23-43 mm
Guillemin variant (SKU 5725)
Guillemin system variant SKU 5725 - French standard, NBR seal
Guillemin variant (SKU 5728)
Guillemin system variant SKU 5728 - French standard, NBR seal
Guillemin variant (SKU 5729)
Guillemin system variant SKU 5729 - French standard, NBR seal
Guillemin variant (SKU 5730)
Guillemin system variant SKU 5730 - French standard, NBR seal
HEDUFLEX
Heavy-duty suction and pressure hose for water and slurry in industry, construction and agriculture
- Inner Ø: 19-305 mm
- Temp: -30 to +80 °C
Herkules slangeklemme
Herkules hose clamp - German brand for standard industrial installations
- Inner Ø: 8-70 mm
Hoejtryks-damp-kobling variant (SKU 5430)
Hoejtryks-damp-kobling variant SKU 5430 - variant of existing family
High-pressure steam hose coupling
High-pressure steam hose coupling - for strong-steam installations above BOSS system level
- Inner Ø: 25-50 mm
Hülse-skrueforbindelse
Coupling with threaded ferrules - for metal and high-pressure pipe connections
- Inner Ø: 12-25 mm
INDUCORD Glasfiber
High-temperature pressure hose with fibreglass reinforcement
- Inner Ø: 13-76 mm
- Temp: -30 to +200 °C
- Standards: REACH, RoHS
INDUCORD Lancia
Marine mooring and bunkering pressure hose
- Inner Ø: 25-38 mm
- Temp: -30 to +80 °C
- Standards: REACH, RoHS
INDUCORD TC
Industrial pressure hose Type C for medium-duty chemicals
- Inner Ø: 38-51 mm
- Temp: -30 to +80 °C
- Standards: REACH, RoHS
INDUCORD®
Abrasion-resistant industrial water hose — for water, slurry and light chemicals in agriculture and industry
- Inner Ø: 22-254 mm
- Temp: -20 to +70 °C
INDUFORM RL
Thermoplastic pressure hose RL (round light) for chemical handling
- Inner Ø: 13-25 mm
- Temp: -20 to +80 °C
- Standards: REACH, RoHS
INDUFORM RR
Thermoplastic pressure hose RR (round robust) for higher load
- Inner Ø: 13-32 mm
- Temp: -20 to +80 °C
- Standards: REACH, RoHS
ISODUC ALU-PES 368
Highly flexible HVAC hose in aluminium-polyester laminate
- Inner Ø: 76-610 mm
- Temp: -30 to +140 °C
ISODUC ALU-PES 368 Anti-Bacterial
Antibacterial HVAC hose for hospitals and laboratories
- Inner Ø: 76-610 mm
- Temp: -30 to +140 °C
ISODUC ALU-PES 368 SE
Reinforced ALU-PES variant with extra coil density
- Inner Ø: 76-610 mm
- Temp: -30 to +140 °C
ISODUC ALU-PES 368 Sound Insulation
Sound-damping HVAC hose for fans and cooling units
- Temp: -30 to +140 °C
ISODUC PVC 368 Anti-Bacterial
Antibacterial PVC ventilation hose for standard HVAC
- Inner Ø: 76-610 mm
- Temp: -10 to +80 °C
ISODUC PVC 368 Black
Black PVC ventilation hose for visible installations
- Inner Ø: 76-610 mm
- Temp: -10 to +80 °C
ISODUC PVC 368 Grey
Grey PVC ventilation hose - classic HVAC colour
- Inner Ø: 76-610 mm
- Temp: -10 to +80 °C
In-line filter
In-line filter for water and air installations - removes solid particles before valve/process
- Inner Ø: 13-25 mm
Kamlok variant (SKU 5500)
Kamlok variant SKU 5500 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5501)
Kamlok variant SKU 5501 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5502)
Kamlok variant SKU 5502 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5503)
Kamlok variant SKU 5503 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5504)
Kamlok variant SKU 5504 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5505)
Kamlok variant SKU 5505 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5506)
Kamlok variant SKU 5506 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5507)
Kamlok variant SKU 5507 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5509)
Kamlok variant SKU 5509 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5510)
Kamlok variant SKU 5510 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5511)
Kamlok variant SKU 5511 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5512)
Kamlok variant SKU 5512 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5513)
Kamlok variant SKU 5513 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5514)
Kamlok variant SKU 5514 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5515)
Kamlok variant SKU 5515 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5516)
Kamlok variant SKU 5516 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5517)
Kamlok variant SKU 5517 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5518)
Kamlok variant SKU 5518 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5519)
Kamlok variant SKU 5519 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5520)
Kamlok variant SKU 5520 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5521)
Kamlok variant SKU 5521 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5522)
Kamlok variant SKU 5522 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5523)
Kamlok variant SKU 5523 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5524)
Kamlok variant SKU 5524 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5525)
Kamlok variant SKU 5525 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5526)
Kamlok variant SKU 5526 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5527)
Kamlok variant SKU 5527 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5528)
Kamlok variant SKU 5528 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5529)
Kamlok variant SKU 5529 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5590)
Kamlok variant SKU 5590 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5591)
Kamlok variant SKU 5591 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5592)
Kamlok variant SKU 5592 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5593)
Kamlok variant SKU 5593 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5594)
Kamlok variant SKU 5594 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5595)
Kamlok variant SKU 5595 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5596)
Kamlok variant SKU 5596 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5597)
Kamlok variant SKU 5597 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5600)
Kamlok variant SKU 5600 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5601)
Kamlok variant SKU 5601 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5602)
Kamlok variant SKU 5602 - cam-and-groove coupling, stainless or aluminium
Kamlok variant (SKU 5603)
Kamlok variant SKU 5603 - cam-and-groove coupling, stainless or aluminium
Klau-kobling med male thread
Claw coupling with male thread (BSPP/G) for compressor installations - malleable cast iron, DIN 3489
- Inner Ø: 42-42 mm
Klau-kobling variant (SKU 5210)
Claw coupling variant SKU 5210 - DIN 3489, malleable cast iron
- Inner Ø: 42-42 mm
Klau-kobling variant (SKU 5211)
Claw coupling variant SKU 5211 - DIN 3489, malleable cast iron
- Inner Ø: 42-42 mm
Klau-kobling variant (SKU 5219)
Claw coupling variant SKU 5219 - DIN 3489, malleable cast iron
- Inner Ø: 42-42 mm
Klau-laasekap variant (SKU 5226)
Klau-laasekap variant SKU 5226 - variant of existing family
Klau-laasekapper (blank cap)
Claw coupling blank caps per DIN 3489 - blank cap for closing open claw coupling, malleable cast iron
- Inner Ø: 42-42 mm
Klemmskal variant (SKU 5560)
Klemmskal variant SKU 5560 - variant of existing family
Klemmskaller (safety clamps)
Clamping shells (safety clamps) - enclosing securing shells for coupling installations
- Inner Ø: 50-100 mm
Kugleventil type 9000
Ball valve type 9000 - standard industrial valve with brass body and hand lever
- Inner Ø: 13-25 mm
Kugleventil type 9100
Ball valve type 9100 - high-pressure variant of the 9000 series
- Inner Ø: 13-25 mm
LAVAFORM
Thermoplastic water hose for washing machines and cold-water applications
- Inner Ø: 10-13 mm
- Temp: -20 to +60 °C
LAVAFORM/EXTRA
Thermoplastic water hose for hot-water applications in washing machines and pumps
- Inner Ø: 10-13 mm
- Temp: -20 to +95 °C
Losflansch (loose flange)
Losflansch (swiveling flange) - can rotate freely around pipe end for easy bolt pattern alignment
- Inner Ø: 80-150 mm
Losflansch variant (SKU 5615)
Losflansch variant SKU 5615 - variant of existing family
METAL HOSE 101 AD
Highly flexible metal protection conduit — cable protection up to 400 °C
- Inner Ø: 8-51 mm
- Temp: 0 to +400 °C
METAL HOSE 375
Abrasion-resistant metal hose — ATEX Zone 20·21·22, conductive, up to +120 °C
- Inner Ø: 20-500 mm
- Temp: 0 to +120 °C
METAL HOSE 375 HT
Heat-resistant metal hose — up to +400 °C, conductive, ATEX-approved for Zone 20-22
- Inner Ø: 20-500 mm
- Temp: 0 to +400 °C
METAL HOSE ALU 377 - ALUFLEX
Self-locking aluminium hose — flame-retardant, for air conditioning and extraction hoods
- Inner Ø: 75-400 mm
- Temp: 0 to +300 °C
METAL HOSE Agraff PUR 151 AD
Robust agraff metal hose with PUR coating - cable protection rated IP 68
- Inner Ø: 13-22 mm
- Temp: -40 to +90 °C
METAL HOSE Agraff VA 150 AD
Stainless steel agraff hose for cable protection up to 600 C
- Inner Ø: 5-23 mm
- Temp: -40 to +600 °C
METAL HOSE INOX 376
Stainless steel suction hose — up to +600 °C, abrasion-resistant, ATEX Zone 20·21·22 inside
- Inner Ø: 20-300 mm
- Temp: 0 to +600 °C
METAL HOSE PUR 105 AD
Very robust PU-coated metal protection conduit — liquid-tight, IP 68, for cable protection
- Inner Ø: 7-22 mm
- Temp: -40 to +90 °C
METAL HOSE PVC 102 AD
PVC-coated metal hose for cable protection in chemically exposed zones with IP 68
- Inner Ø: 7-22 mm
- Temp: -20 to +70 °C
METAL HOSE VA 108 AD
Stainless steel hose for cable protection up to 600 C
- Inner Ø: 5-23 mm
- Temp: -40 to +600 °C
MILKCORD/SP/BUTYL
Butyl dairy/food hose, alcohol up to 96%, steam-cleanable SIP to 130 C
- Inner Ø: 32-102 mm
- Temp: -30 to +120 °C
- Standards: EU 1935/2004
MILKCORD®/SP
Flexible milk hose — food-grade NBR hose with steam-cleanable wall
- Inner Ø: 32-102 mm
- Temp: -20 to +90 °C
- Standards: EU 1935/2004
MODY justerbar klau-kobling
MODY adjustable claw coupling with hose tail and holding screw - for compressor installations
- Inner Ø: 42-42 mm
MP 20
Conductive EPDM multi-purpose hose, 20 bar PN, -40 to +120 C
- Inner Ø: 10-25 mm
- Temp: -40 to +120 °C
Mikalor Edelstahl worm-drive klemme
Mikalor stainless steel worm-drive hose clamp - corrosion-resistant
- Inner Ø: 12-60 mm
Mikalor Supra Super hose clamp
Mikalor Supra heavy-duty breitband clamp - 24-30 mm wide band, high clamping force
- Inner Ø: 40-140 mm
Mini kugleventil type 125
Mini ball valve type 125 - compact solution for instrumentation and small pipe connections
- Inner Ø: 6-10 mm
Mini kugleventil type 126
Mini ball valve type 126 - alternative to type 125 with different specification
- Inner Ø: 6-10 mm
Montage-noegle (steel spanner)
Steel spanner - special tool for mounting TW couplings and special tank truck fittings
- Inner Ø: 50-100 mm
NAFTOIL/BUNA 30 MM
Specialised 30 mm NBR/PVC oil and water hose, 6 bar / 0.9 bar vacuum
- Inner Ø: 30-30 mm
- Temp: -30 to +65 °C
- Standards: REACH, RoHS
NAFTREX/B
Textile-braided NBR fuel hose per DIN 73379 Type B + SAE J30
- Inner Ø: 3.2-11.5 mm
- Temp: -35 to +90 °C
- Standards: REACH, RoHS
NEO 390 ONE
Single-layered neoprene hose for hot and cold gases up to 150 C
- Inner Ø: 13-305 mm
- Temp: -40 to +150 °C
NEO 390 TWO
Double-layered neoprene hose with increased pressure and abrasion resistance
- Inner Ø: 13-305 mm
- Temp: -40 to +150 °C
NIPLAFLEX
Heavy-duty NBR/PU/PVC multi-purpose hose, 25 bar PN, weather and UV-resistant
- Inner Ø: 6-25 mm
- Temp: -20 to +70 °C
NITROGEN/YELLOW
Highly flexible antistatic gas hose — for air, water and nitrogen in petrochemistry and industry
- Inner Ø: 19.5-19.5 mm
- Temp: -20 to +60 °C
- Standards: REACH, RoHS
NORFLEX PUR 401 FOOD special wall
Lightweight food-grade PUR hose with thin 1.5 mm wall, FDA-approved
- Inner Ø: 5-8 mm
- Temp: -40 to +90 °C
NORFLEX SIL 408 special wall 1.5 mm
High-temperature food-grade silicone 1.5 mm wall, -60 to +180 C
- Inner Ø: 3-5 mm
- Temp: -60 to +180 °C
NORFLEX SIL 408 special wall 2 mm
Food-approved silicone hose for precise liquid transfers up to 180 C
- Inner Ø: 2-3 mm
- Temp: -60 to +180 °C
NORFLEX SIL 408 special wall 2.5 mm
High-temperature food-grade silicone 2.5 mm wall, -60 to +180 C
- Inner Ø: 10-10 mm
- Temp: -60 to +180 °C
NORFLEX SIL 408 special wall 3 mm
High-temperature food-grade silicone 3 mm wall, -60 to +180 C
- Inner Ø: 8-12 mm
- Temp: -60 to +180 °C
NORFLEX SIL 448
Textile-reinforced silicone pressure hose, up to 16 bar, -60 to +180 C
- Inner Ø: 3-19 mm
- Temp: -60 to +180 °C
NORFLEX® PTFE 407
Highly flexible PTFE hose — food-grade, extremely chemical-resistant, for pharma
- Inner Ø: 2-14 mm
- Temp: -60 to +200 °C
- Standards: EU 10/2011
NORFLEX® PUR 401 FOOD
Highly flexible food-grade PUR hose for tight installations
- Inner Ø: 2-19 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011, FDA 21 CFR
NORFLEX® PUR 441 FOOD
Food-grade PUR hose — abrasion-resistant, transparent, for dry and liquid food
- Inner Ø: 2.9-19 mm
- Temp: -40 to +90 °C
NORFLEX® PUR 441 ROBOTIC BLUE
Abrasion-resistant PUR high-pressure hose for robotics — Blue, up to 20 bar working pressure
- Inner Ø: 6.4-19.5 mm
- Temp: -35 to +80 °C
NORFLEX® PUR 441 ROBOTIC GREEN
Abrasion-resistant PUR high-pressure hose for robotics — Green, up to 20 bar working pressure
- Inner Ø: 9.4-19.5 mm
- Temp: -35 to +80 °C
NORFLEX® PUR 441 ROBOTIC RED
Abrasion-resistant PUR high-pressure hose for robotics — Red, up to 20 bar working pressure
- Inner Ø: 6.4-19.5 mm
- Temp: -35 to +80 °C
NORFLEX® PUR 441 ROBOTIC BLACK
Abrasion-resistant PUR high-pressure hose for robotics — Black, up to 20 bar working pressure
- Inner Ø: 6.4-12.5 mm
- Temp: -35 to +80 °C
NORFLEX® PVC 400 SPECIAL WALL
Highly flexible PVC hose with extra wall thickness — for compressed air and coolant
- Inner Ø: 40-40 mm
- Temp: -15 to +60 °C
NORFLEX® SIL 408
Food-grade silicone hose — −60 to +180 °C, transparent, for pharma and food production
- Inner Ø: 2-25 mm
- Temp: -60 to +180 °C
NORPLAST PVC 389 SUPERELASTICO
Highly flexible thermoplastic hose — for water, slurry and irrigation systems in moderate conditions
- Inner Ø: 25-203 mm
- Temp: -25 to +60 °C
NORPLAST® 385 AS GRANUFLEX®
Antistatic PUR suction hose — abrasion-resistant, for granulate transport in ATEX zones
- Inner Ø: 38-60 mm
- Temp: -40 to +80 °C
NORPLAST® PUR 385 AIRFLEX®/PU/FOOD
Multi-purpose food-grade PUR hose — abrasion-resistant, for liquid, dry and oily foods
- Inner Ø: 25-51 mm
- Temp: -15 to +40 °C
- Standards: EU 10/2011
NORPLAST® PUR 385 Airflex® AS
Abrasion-resistant antistatic PUR hose — versatile industrial use from granulate to cable protection
- Inner Ø: 20-152 mm
- Temp: -20 to +70 °C
NORPLAST® PUR 386 SCIROPPO® PU FOOD AS
Food-grade antistatic PUR suction and pressure hose — for liquid foods and abrasive granulates
- Inner Ø: 38-60 mm
- Temp: -40 to +80 °C
- Standards: EU 10/2011
NORPLAST® PUR 387 ANTIABRASIVO®/AS
Antistatic PUR suction hose — extremely abrasion-resistant, for gravel, mud, cement and grain
- Inner Ø: 76-152 mm
- Temp: -15 to +60 °C
NORPLAST® PUR-C 385 AIRFLEX®/AS
Antistatic PUR hose with grounding wire — for ATEX-relevant applications and surface treatment
- Inner Ø: 25-127 mm
- Temp: -40 to +90 °C
NORPLAST® PVC 379 COSMO®/ELASTICO
Highly flexible PVC suction hose — dark green, for water, fertilisers and seeds in agriculture
- Inner Ø: 40-51 mm
- Temp: -15 to +60 °C
NORPLAST® PVC 380 GREEN
PVC suction and pressure hose — green-transparent, for marine, agriculture and granulate conveying
- Inner Ø: 25-76 mm
- Temp: -10 to +60 °C
- Standards: EU 10/2011
NORPLAST® PVC 383
Multi-purpose PVC suction hose — gases, abrasive dusts, chemicals in industry, agri and medical
- Inner Ø: 25-100 mm
- Temp: -15 to +60 °C
NORPLAST® PVC 384 SCIROPPO®/AS
Food-grade antistatic PVC suction and pressure hose — for liquid, powdery and granular foods
- Inner Ø: 25-90 mm
- Temp: -15 to +60 °C
- Standards: EU 10/2011
NORPLAST® PVC 389 NAFTOIL/BUNA
Highly flexible PVC suction hose for water, slurry and oils — in industry, horticulture and agriculture
- Inner Ø: 25-152 mm
- Temp: -30 to +65 °C
NORPLAST® PVC COSMO® ELASTICO SEEDER
Kink-resistant PVC suction hose — specially designed for seeds and solid fertilisers in agriculture
- Inner Ø: 25-40 mm
- Temp: -15 to +60 °C
NORPLAST® PVC-C 389 CORRUFLEX®/AS
Antistatic PVC-C clamp profile suction hose — corrugated outer cover, for chemical industry
- Inner Ø: 51-152 mm
- Temp: -15 to +70 °C
PETROL-OIL
Specialised hose for oil and fuel transfer at tank trucks and terminals
- Inner Ø: 6-25 mm
- Temp: -40 to +90 °C
- Standards: REACH, RoHS
POLYFLEX
Food-grade flexible compressed air hose — for water and compressed air systems
- Inner Ø: 5-51 mm
- Temp: -15 to +60 °C
- Standards: EU 10/2011
POLYFORM
Food-grade pressureless water hose — transparent, for food and pharma
- Inner Ø: 3-50 mm
- Temp: -20 to +60 °C
- Standards: EU 10/2011
PROTAPE ALU-PES 369 ANTI-BACTERIAL
Anti-bacterial ventilation hose for HVAC and hygiene-sensitive rooms
- Inner Ø: 76-610 mm
- Temp: -30 to +130 °C
PROTAPE PUR 330 AS BLACK (LD)
Antistatic PUR extraction hose for dust and vapours in ATEX zones
- Inner Ø: 25-202.3 mm
- Temp: -40 to +90 °C
- Standards: TRGS 727
PROTAPE PUR 370 (LD)
Flame-retardant, fabric-reinforced PUR hose for welding fume and hot-air extraction
- Inner Ø: 50.5-254 mm
- Temp: -40 to +125 °C
PROTAPE PUR-INOX 330 FOOD-AS (LD)
Food-grade, antistatic PUR hose with INOX spiral for ATEX and hygiene
- Inner Ø: 38-500 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
PROTAPE PVC 371 AS (HD)
Antistatic, flame-retardant PVC extraction hose for galvanisation and chemical industry
- Inner Ø: 50-600 mm
- Temp: -20 to +90 °C
PROTAPE TPE 321 REINFORCED (LD)
Fabric-reinforced TPE hose for hot-air and chemical vapours up to 110 C
- Inner Ø: 40-450 mm
- Temp: -40 to +110 °C
PROTAPE TPE 326 MEMORY
Crush-resistant TPE hose for hot exhaust gas up to 200 C with shape recovery
- Inner Ø: 50.5-202.3 mm
- Temp: -40 to +200 °C
PROTAPE® ALU-PES 369
Highly flexible air conditioning hose — flame-retardant, up to +140 °C, alu-pes-based
- Inner Ø: 75-610 mm
- Temp: -40 to +140 °C
PROTAPE® ALU-PVC 369
Highly flexible air conditioning hose — flame-retardant, up to +140 °C, alu-pvc-based
- Inner Ø: 76-610 mm
- Temp: -40 to +140 °C
PROTAPE® PUR 301 AS (XLD)
Extra-light-duty antistatic PUR hose — flame-retardant, microbe-resistant, for Zone 22
- Inner Ø: 25.1-500 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
PROTAPE® PUR 327 MEMORY
Crush-resistant food-grade PUR hose — for municipal vehicles and toilet discharging
- Inner Ø: 50.5-202.3 mm
- Temp: -40 to +80 °C
- Standards: EU 10/2011
PROTAPE® PUR 327 PP
Antistatic food-grade PUR hose — for municipal vehicles and CT/MRI air
- Inner Ø: 50.5-202.3 mm
- Temp: -40 to +80 °C
- Standards: EU 10/2011
PROTAPE® PUR 330 AS (LD)
Highly flexible antistatic PUR hose — flame-retardant multipurpose in light-duty construction
- Inner Ø: 25-500 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
PROTAPE® PUR 330 AS BLACK
Antistatic PUR hose, lightweight and flame-retardant — microbe-resistant and easy to identify
- Inner Ø: 50.5-300 mm
- Temp: -40 to +90 °C
PROTAPE® PUR 330 FOOD (LD)
Highly flexible food hose — LD construction for food, pharma and medical technology
- Inner Ø: 25.1-450 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
PROTAPE® PUR 331 FOOD (XLD)
Light-duty food hose — XLD construction for extraction and filling lines in pharma and food
- Inner Ø: 50.5-255 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
PROTAPE® PUR 332 SE (LD)
Self-extinguishing PU hose — DIN 4102-B1 + FMVSS 302, for ventilation in trains and ships
- Inner Ø: 30-65 mm
- Temp: -40 to +90 °C
PROTAPE® PUR 333 AS (MD)
Antistatic PUR hose with increased pressure and vacuum resistance for municipal vehicles and suction processes
- Inner Ø: 40-300 mm
- Temp: -40 to +90 °C
PROTAPE® PUR-C 335 FOOD-AS FLAT
Antistatic food flat hose — for screening machines and vibrating equipment in classified zones
- Inner Ø: 50.5-450 mm
- Temp: -40 to +90 °C
- Standards: EU 1935/2004, EU 10/2011
PROTAPE® PVC 310 (LD)
Flame-retardant PVC hose for solvent vapours and X-ray cable protection
- Inner Ø: 30-300 mm
- Temp: -10 to +80 °C
PROTAPE® PVC 371 (HD)
Heavy duty PVC ventilation hose — self-extinguishing per ISO 3795, blue, for galvanic extraction
- Inner Ø: 50-600 mm
- Temp: -20 to +90 °C
PROTAPE® PVC 371 (LD)
Flame-retardant PVC ventilation hose — the lightest (LD) variant of PROTAPE® PVC 371
- Inner Ø: 40-508 mm
- Temp: -10 to +80 °C
PROTAPE® PVC 371 (MD)
Flame-retardant ventilation hose — flexible, fabric-reinforced, for hot air and welding fume
- Inner Ø: 50-600 mm
- Temp: -10 to +80 °C
PROTAPE® PVC 371 ANTI-BACTERIAL (XLD)
Flame-retardant PVC ventilation hose — the antibacterial XLD variant for air conditioning systems
- Inner Ø: 76-610 mm
- Temp: -10 to +80 °C
PROTAPE® PVC 371 GREY (XLD)
Flame-retardant PVC ventilation hose — the grey XLD variant with 10:1 compression and FMVSS 302 approval
- Inner Ø: 76-610 mm
- Temp: -10 to +80 °C
PROTAPE® PVC 371 HT (LD)
Flame-retardant PVC ventilation hose — the high-temperature (HT) variant with M1 fire class, up to +110 °C continuous
- Inner Ø: 50.5-305 mm
- Temp: -10 to +110 °C
PROTAPE® TPE 320 AS (XLD)
Antistatic TPE hose — chemical- and heat-resistant in extra-light-duty construction
- Inner Ø: 25-250 mm
- Temp: -40 to +125 °C
PTFE-tape
PTFE tape (Teflon tape) - for sealing thread pipe connections
- Inner Ø: 12-19 mm
- Temp: -200.0 to +260.0 °C
PYROFLAT
Layflat firefighting hose, EPDM/PU, seawater-resistant
- Inner Ø: 38-102 mm
- Temp: -40 to +80 °C
PYTHON
Robust EPDM water hose with conductive wall, up to +110 C, marine-suitable
- Inner Ø: 13-32 mm
- Temp: -40 to +110 °C
Pa-Ri klemme (SKU 6100)
Pa-Ri clamp variant SKU 6100 - one-handed mounting
- Inner Ø: 40-40 mm
Pa-Ri klemme (SKU 6110)
Pa-Ri clamp variant SKU 6110 - one-handed mounting
- Inner Ø: 40-40 mm
Pa-Ri klemme (SKU 6120)
Pa-Ri clamp variant SKU 6120 - one-handed mounting
- Inner Ø: 40-40 mm
Pa-Ri klemme (SKU 6180)
Pa-Ri clamp variant SKU 6180 - one-handed mounting
- Inner Ø: 40-40 mm
Pa-Ri slangeklemme-system
Pa-Ri hose clamp system - wide range dimensions and one-handed mounting
- Inner Ø: 20-120 mm
Pakning til MODY klau-kobling
Replacement gasket for MODY claw couplings - lug 42 mm
- Inner Ø: 42-42 mm
Pakning til klau-kobling
Oil-resistant gasket for claw couplings with 42 mm lug distance - spare part per DIN 3489
- Inner Ø: 42-42 mm
Perrot kobling-system
Perrot coupling system with safety clamp assembly type CK 78 - hot dip galvanised steel
- Inner Ø: 102-102 mm
Perrot variant (SKU 5720)
Perrot coupling variant SKU 5720 - German standard for agriculture and slurry transport
Perrot variant (SKU 5721)
Perrot coupling variant SKU 5721 - German standard for agriculture and slurry transport
Perrot variant (SKU 5722)
Perrot coupling variant SKU 5722 - German standard for agriculture and slurry transport
Perrot variant (SKU 5732)
Perrot coupling variant SKU 5732 - German standard for agriculture and slurry transport
QUADRIFLEX
Lightweight PVC vacuum hose with oval spiral, 0.9 bar negative pressure
- Inner Ø: 51-152 mm
- Temp: -25 to +60 °C
RADIACORD
EPDM cooling water hose with antifreeze resistance for closed cooling circuits
- Inner Ø: 10-110 mm
- Temp: -30 to +100 °C
RADIACORD®/DIN
Cooling water hose — per DIN 73411, for hot and cold water applications
- Inner Ø: 10-120 mm
- Temp: -30 to +130 °C
RESPIROFORM
Breathing air hose per EN 14594, antistatic, flame-retardant
- Inner Ø: 9.5-9.5 mm
- Temp: -20 to +70 °C
Reducerings-nippel
Reduce nipple - male-male with different thread sizes, for reduction between pipe connection systems
- Inner Ø: 13-25 mm
Reservedele klinge til skaerevaerktoejer (SKU 5002)
Reservedele klinge til skaerevaerktoejer SKU 5002 - variant of existing family
Reservepakning (rubber seal)
Replacement gasket in rubber - for general maintenance of coupling installations
- Inner Ø: 25-75 mm
Rundsnor (cord)
Cord - for custom O-ring seals or special sealing applications
- Inner Ø: 3-8 mm
SALDAFORM/BLACK
Corrugated welding hose (black) for neutral gases in oxy-fuel applications
- Inner Ø: 6.3-9 mm
- Temp: -30 to +80 °C
SALDAFORM/RED
Corrugated acetylene welding hose (red) for oxy-fuel applications
- Inner Ø: 6.3-16 mm
- Temp: -30 to +80 °C
SALDAFORM®
Twin welding hose — for oxyacetylene welding of oxygen and acetylene in one assembly
- Temp: -25 to +65 °C
SALDAFORM®/BLUE
Corrugated oxygen hose — for oxyacetylene welding, ISO 3821:2019
- Inner Ø: 6.3-16 mm
- Temp: -30 to +70 °C
SIL 391 ONE
Single-layered silicone hose for hot and cold gases up to 280 C
- Inner Ø: 19-305 mm
- Temp: -40 to +280 °C
SIL 391 TWO
Double-layered silicone hose with increased robustness and 280 C capacity
- Inner Ø: 13-305 mm
- Temp: -40 to +280 °C
SILOCORD
Abrasion-resistant silo hose for cement, sand and granulates
- Inner Ø: 76-102 mm
- Temp: -30 to +80 °C
SILOCORD ALIM
Food-grade silo hose for feed and foodstuffs
- Inner Ø: 75-100 mm
- Temp: -30 to +80 °C
SILOCORD ALIM SP
Food-grade silo hose with extra-thick wall (SP)
- Inner Ø: 75-100 mm
- Temp: -30 to +80 °C
SILOCORD SP
SILOCORD with extra-thick wall (Special wall)
- Inner Ø: 76-102 mm
- Temp: -30 to +80 °C
SILOCORD Spezial
Reinforced SILOCORD for higher mechanical load
- Inner Ø: 76-102 mm
- Temp: -30 to +80 °C
SILOCORD Spezial SP
Reinforced SILOCORD with extra-thick wall
- Inner Ø: 76-152 mm
- Temp: -30 to +80 °C
SILOFLAT
Layflat discharge hose for cement, feed and abrasive bulk media
- Inner Ø: 76-102 mm
- Temp: -30 to +85 °C
SILOFLAT/DISCHARGE
Conductive pressureless silo discharge hose for cement and abrasive bulk media
- Inner Ø: 152-305 mm
- Temp: -30 to +85 °C
SM1 STRAHLMEISTER
Industry-best-in-class sandblasting hose, abrasion 36 mm3, conductive
- Inner Ø: 13-42 mm
- Temp: -35 to +80 °C
SOLVOFORM
Robust compressor hose — for compressed air, lubricating oil and greases in workshops
- Inner Ø: 6-19 mm
- Temp: -20 to +60 °C
- Standards: REACH, RoHS
ST male MKST zinc-plated
ST male MKST zinc-plated 100 - male configuration of MKST one-piece coupling, zinc-plated steel
- Inner Ø: 50-80 mm
ST male MKST zinc-plated variant (SKU 8552000014)
ST male MKST zinc-plated variant SKU 8552000014 - variant of existing family (canonical: st-male-mkst-zinc)
ST male VKST zinc-plated
ST male VKST zinc-plated 100 - male configuration of VKST one-piece coupling, zinc-plated
- Inner Ø: 50-80 mm
STEAMFLEX/EN/ISO
Standardised EPDM steam hose for 18 bar saturated steam and 55 bar hot water per EN ISO 6134:2017
- Inner Ø: 13-51 mm
- Temp: -40 to +210 °C
SUPER AIR
Lightweight PVC compressed air and water hose, 20 bar PN, weather and UV-resistant
- Inner Ø: 6-25 mm
- Temp: -20 to +60 °C
SUPERCHEM®/UPE/EN
Extremely flexible suction and pressure hose for aggressive chemicals
- Inner Ø: 19-100 mm
- Temp: -30 to +100 °C
- Standards: REACH, RoHS
Safe-Lock Kamlok part B
Safe-Lock Kamlok part B - securing solution for kamlok couplings with anti-blow-off mechanism
- Inner Ø: 25-75 mm
Safe-Lock Kamlok part C
Safe-Lock Kamlok part C - securing solution for kamlok couplings with anti-blow-off mechanism
- Inner Ø: 25-75 mm
Safe-Lock Kamlok part D
Safe-Lock Kamlok part D - securing solution for kamlok couplings with anti-blow-off mechanism
- Inner Ø: 25-75 mm
Safe-Lock Kamlok part DC
Safe-Lock Kamlok part DC - dust cap variant for closing open kamlok port
- Inner Ø: 25-75 mm
Sikkerheds-kaede
Security chain - for attachment of caps, plugs and other loose components to coupling installations
- Inner Ø: 200-400 mm
Slange-forbinder (hose mender)
Hose mender - to connect two hose ends together in a mid-line joint
- Inner Ø: 13-32 mm
Slange-stuts (hose tail)
Hose tail - base coupling to connect hose to pipe connection system
- Inner Ø: 20-50 mm
Slange-tylle (hose coupling)
Hose coupling - simple coupling between two hose ends without intermediate pipe connection
- Inner Ø: 13-32 mm
Slange-tylle variant (SKU 5319)
Slange-tylle variant SKU 5319 - variant of existing family
Slangeklemme med sikkerheds-klauer
Hose clamp with 2 safety claws - mechanical anti-blow-off on high-pressure installations
- Inner Ø: 20-100 mm
Slangesakse Loewe type 3204/P90
Hose cutter Loewe type 3204/P90 - professional tool for precise hose cutting
- Inner Ø: 32-32 mm
Sprute-duese (nozzle)
Spray nozzle - hand-held end-of-line water sprayer for hose installations
- Inner Ø: 13-20 mm
Sprute-duese variant (SKU 5352)
Sprute-duese variant SKU 5352 - variant of existing family
Storz Storz Y-piece (SKU 5121)
Storz system Y-piece - aluminium, BSPP/G-thread
Storz Storz adapter T-piece (SKU 5123)
Storz system T-piece - aluminium, BSPP/G-thread
Storz Storz adapter male thread (SKU 5110)
Storz system with male thread (G-thread) - aluminium, BSPP/G-thread
Storz Storz blank cap (SKU 5112)
Storz system blank cap - aluminium, BSPP/G-thread
Storz Storz double male (SKU 5117)
Storz system double-male variant - aluminium, BSPP/G-thread
Storz Storz elbow (SKU 5120)
Storz system elbow - aluminium, BSPP/G-thread
Storz Storz fittings extension (SKU 5124)
Storz system extension fitting - aluminium, BSPP/G-thread
Storz Storz hose tail (SKU 5113)
Storz system hose tail - aluminium, BSPP/G-thread
Storz Storz pipe section (SKU 5118)
Storz system pipe section - aluminium, BSPP/G-thread
Storz Storz reduction (SKU 5115)
Storz system reduction between two Storz sizes - aluminium, BSPP/G-thread
Super-Klem breitband-slangeklemme
Super-Klem French breitband hose clamp - alternative to Mikalor Supra
- Inner Ø: 50-100 mm
SuperFlex PVC 372
Highly flexible PVC suction/pressure hose for industrial vacuum cleaners and building drying
- Inner Ø: 25-100 mm
- Temp: 0 to +85 °C
TEMPERFORM/BLUE
Extremely flexible EPDM cooling hose for temperature control up to 100 C
- Inner Ø: 9.5-12.7 mm
- Temp: -20 to +100 °C
TEMPERFORM/RED
Extremely flexible EPDM cooling hose (red) for temperature control up to 100 C
- Inner Ø: 9.5-12.7 mm
- Temp: -20 to +100 °C
TIMBERDUC PUR 531 AS (XLD)
Highly flexible suction and pressure hose for the wood industry (XLD = extra light duty)
- Inner Ø: 50.5-400 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
TIMBERDUC PUR 532 AS (LD)
Highly flexible suction and pressure hose for the wood industry (LD = light duty)
- Inner Ø: 40-400 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
TIMBERDUC PUR 532 CNC (MD)
Medium-duty hose specifically for CNC milling
- Inner Ø: 200-400 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
TIMBERDUC PUR 533 AS
Highly abrasion-resistant suction and pressure hose with increased pressure and vacuum resistance
- Inner Ø: 100-104 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
TIMBERDUC PUR 533 AS (MD)
Highly abrasion-resistant suction and pressure hose with increased pressure and vacuum resistance
- Inner Ø: 100-104 mm
- Temp: -40 to +90 °C
- Standards: ATEX 2014/34/EU, TRGS 727
TRICOTECH
Smooth torsion-free PVC water hose for irrigation, garden and construction
- Inner Ø: 12.5-50 mm
- Temp: -10 to +60 °C
TUBIMAR/LLOYDS
Lloyd's-certified marine exhaust hose for yachts up to 24 m
- Inner Ø: 40-127 mm
- Temp: -30 to +100 °C
TURBOCORD
Heavy-duty sandblasting hose, abrasion 60-70 mm3, conductive, 12 bar PN
- Inner Ø: 13-50 mm
- Temp: -30 to +80 °C
TURBOFLEX®/U.L./OHM
Conductive abrasion-resistant hose — sandblasting workhorse with 60 mm³ abrasion value
- Inner Ø: 51-152 mm
- Temp: -35 to +80 °C
TW O-ring NBR
TW O-ring in NBR (black) - for union coupling type MK
- Inner Ø: 100-100 mm
TW O-ring variant (SKU 5033)
TW O-ring variant SKU 5033 - variant of existing family
TW form-pakning Viton
TW form-shaped sealing in Viton (FKM) for MKV sealing rings - high-temperature and chemical-resistant
- Inner Ø: 50-80 mm
TW form-pakning variant (SKU 5035)
TW form-shaped sealing variant SKU 5035 - for MKV sealing rings
- Inner Ø: 50-50 mm
TW form-pakning variant (SKU 5037)
TW form-shaped sealing variant SKU 5037 - for MKV sealing rings
- Inner Ø: 50-50 mm
TW form-pakning variant (SKU 5583)
TW form-shaped sealing variant SKU 5583 - for MKV sealing rings
- Inner Ø: 50-50 mm
TW gevind-pakning
TW thread seal - for BSPP threads on TW couplings, NBR or silicone
- Inner Ø: 50-80 mm
TW gevind-pakning variant (SKU 5031)
TW gevind-pakning variant SKU 5031 - variant of existing family
TW kappe MB variant (SKU 5568)
TW kappe MB variant SKU 5568 - variant of existing family
TW kappe type MB
TW cap type MB in stainless steel for VK couplings - with chain hole
- Inner Ø: 50-100 mm
TW kobling MK variant (SKU 5563)
TW kobling MK variant SKU 5563 - variant of existing family
TW kobling MKST en-piece
TW coupling type MKST in one-piece construction - stainless steel, integrated for tank truck installations
- Inner Ø: 50-80 mm
TW kobling VK variant (SKU 5562)
TW kobling VK variant SKU 5562 - variant of existing family
TW kobling VKST en-piece
TW coupling type VKST in one-piece construction - stainless steel with BSPP
- Inner Ø: 50-80 mm
TW kobling type MK
TW coupling type MK in stainless steel with female thread - for tank truck installations
- Inner Ø: 100-100 mm
TW kobling type VK
TW coupling type VK in stainless steel with BSPP female thread - 16 bar working pressure
- Inner Ø: 50-100 mm
TW kronring MKV variant (SKU 5584)
TW kronring MKV variant SKU 5584 - variant of existing family
TW kronring type MKV
TW crown ring type MKV - clamping ring for TW MK couplings with form seal
- Inner Ø: 50-80 mm
TW prop VB variant (SKU 5565)
TW prop VB variant SKU 5565 - variant of existing family
TW prop type VB
TW plug type VB in polyamide with chain hole - for clamping ring MKV and MK couplings
- Inner Ø: 50-80 mm
TW slange-stutsen female
TW hose coupling female - female side hose tail for TW installations
- Inner Ø: 50-80 mm
TW slange-stutsen male
TW hose coupling male - male side hose tail for TW installations
- Inner Ø: 50-80 mm
TW spaendingsring MKH variant (SKU 5580)
TW spaendingsring MKH variant SKU 5580 - variant of existing family
TW spaendingsring type MKH
TW clamping ring type MKH - clamping ring for TW MK system with specific geometry
- Inner Ø: 50-80 mm
TWIN HOSE/PVC
Twin control hose for sandblasting guns, 20 bar PN, blue/grey
- Inner Ø: 6-6 mm
- Temp: -20 to +60 °C
Trykluft-kobling DN 5,5
Compressed air coupling DN 5.5 for compressor and pneumatic installations
- Inner Ø: 5.5-5.5 mm
Trykluft-kobling DN 5,5 variant (SKU 5231)
Trykluft-kobling DN 5,5 variant SKU 5231 - variant of existing family
Trykluft-kobling DN 5,5 variant (SKU 5236)
Trykluft-kobling DN 5,5 variant SKU 5236 - variant of existing family
Trykluft-kobling DN 7,2
Compressed air coupling DN 7.2 - heavy-duty for heavier pneumatic tools
- Inner Ø: 7.2-7.2 mm
Trykluft-kobling DN 7,2 variant (SKU 5200)
Trykluft-kobling DN 7,2 variant SKU 5200 - variant of existing family
Trykluft-kobling DN 7,2 variant (SKU 5205)
Trykluft-kobling DN 7,2 variant SKU 5205 - variant of existing family
Trykluft-stiknippel DN 5,5
Compressed air nipple DN 5.5 - male side for quick coupling DN 5.5 (5235)
- Inner Ø: 5.5-5.5 mm
Trykluft-stiknippel DN 5,5 variant (SKU 5232)
Trykluft-stiknippel DN 5,5 variant SKU 5232 - variant of existing family
Trykluft-stiknippel DN 5,5 variant (SKU 5234)
Trykluft-stiknippel DN 5,5 variant SKU 5234 - variant of existing family
Trykluft-stiknippel DN 7,2
Compressed air nipple DN 7.2 - male side for DN 7.2 coupling (5204)
- Inner Ø: 7.2-7.2 mm
Trykluft-stiknippel DN 7,2 variant (SKU 5201)
Trykluft-stiknippel DN 7,2 variant SKU 5201 - variant of existing family
Trykluft-stiknippel DN 7,2 variant (SKU 5203)
Trykluft-stiknippel DN 7,2 variant SKU 5203 - variant of existing family
VAPORCORD
Flexible steam hose for hot water up to 95 C and saturated steam up to 164 C
- Inner Ø: 10-76 mm
- Temp: -35 to +164 °C
VAPORCORD®/ALIM/EXTRA
Food and cleaning hose — fat- and oil-resistant, for hot processes in kitchens and food production
- Inner Ø: 10-50 mm
- Temp: -35 to +100 °C
- Standards: EU 1935/2004
VENTILAZIONE/CALOR
Corrugated heat-resistant ventilation hose for 120 C continuous operation
- Inner Ø: 51-203 mm
- Temp: -40 to +120 °C
Whipcheck slange-sikrings-kabel
Whipcheck hose security cable - prevents hose whip-back on unintentional coupling separation
- Inner Ø: 25-50 mm
Questions we are asked often
How do I find the right hose across categories?
Use the filter panel on the left. Start with category (ATEX/food/high-temperature/abrasive/chemical/accessories), then dimensions and requirements (temperature, inner diameter, standards). If you don't know which category your product belongs to, contact us — we help you find the right starting points.
Can a hose belong to several categories?
Yes, but each hose is primarily placed in one category. An antistatic PUR hose for granulate transport is primarily abrasive, but may also be relevant for ATEX zones. The filter panel helps find hoses across categories by filtering on property (antistatic, food-approved) instead of category alone.
What if the list is too long?
Add more filters. Inner diameter and temperature narrow the list quickly. Standards (DIN 26057, ATEX 2014/34/EU, FDA 21 CFR and so on) are good for finding hoses with specific compliance. If you still have 50+ hoses left, the choice is genuinely between multiple candidates — contact us for guidance.
Where do I find deeper category information?
Each category page (ATEX/ESD, Food/Pharma, High-temperature, Abrasive, Chemical, Accessories) has detailed introduction, thematic section and FAQ specific to that category. Use the menu at the top to navigate directly to the category if you know what you are looking for.
Direct to the categories
- ATEX & ESD hoses — conductive and antistatic for explosive zones.
- Food & Pharma hoses — FDA, EU 1935/2004, USP Class VI.
- High-temperature hoses — silicone, glass fibre, metal.
- Abrasive hoses — PUR and rubber for abrasive media.
- Chemical hoses — PTFE, EPDM, FKM against acids and solvents.
- Accessories — couplings, threads, hose clamps.